The program description
deals with the following:
The data for an OPOS beeper
can be updated, i.e. programmed, changed or cleared, with this program. Data
which has already been stored can also be displayed for information.
Enter the number of the
device under which it is to be stored in the system. The interface and link to
a processing unit should be defined and the device-specific operating mode set.
Note:
99 = Null should be selected as device interface for all OPOS devices.
The OPOS modules should
have been installed and configured if an OPOS device is to be operated.
Click on the graphic for
further help with programming an OPOS Device.
The following description
deals with all available options for update of this basic data.
As with nearly all other
programs the following also applies here:
Entry range permitted:
alphanumeric max. 30 chars.
Note:
An entry in
this field is optional.
Example:
The OPOS modules are entered as follows:
·
HKEY_LOCAL_MACHINE\SOFTWARE\OLEforRetail\
ServiceOPOS\DeviceGroup\DeviceName\
The service
name can be found in program regedit.:
The
device names can be found in the left-hand directory in the device group for
the device concerned, e.g.. "ADSTopCAshCentralLock".
The
appropriate service names can be found in the right-hand directory under key
"Standard" = "ADSTopCash.CentralLock.1".
Click on the graphic for
further help with programming an OPOS Device.
Entry range permitted:
alphanumeric max. 30 chars.
Enter the device name of
this OPOS device in this field.
Example:
The OPOS modules are entered as following in the registration database:
·
HKEY_LOCAL_MACHINE\SOFTWARE\OLEforRetail\
ServiceOPOS\DeviceGroup\DeviceName
The device names can be
found in program regedit.
Click on the graphic to
obtain further help with programming an OPOS Device.
Entry range permitted:
numeric 0 - 255
Select one of the offered
debug levels by clicking onto this field and with a second click confirming the
selection.
The system offers the
following debug level:
Note:
Only select a value
higher than "0" for the debug level if a protocol of data
communications is required for error analysis. The details are shown in file
"errlog" in directory work
of the appropriate system unit.
Default = 500
Enter a value for the pitch
of the first tone.
Default = 100
Enter a value for the
volume of the first tone.
Default = 500
Enter a value for the
duration of the first tone.
Enter a value for the pitch
of the second tone.
This entry is only
necessary if a sequence of tones is required.
Enter a value for the
volume of the second tone.
This entry is only
necessary if a sequence of tones is required.
Enter a value for the
duration of the second tone.
This entry is only
necessary if a sequence of tones is required.
Enter a value for the
period to elapse between the first and second tones.
Enter a value for the
period between the first and second tone sequence.
This entry is only
necessary if a sequence of tones is required.
Button active: Multithreaded is switched on
Button deactivated: Multithreaded is switched off
This option is dependent on
the connected device and must be activated or deactivated accordingly.