The program description
deals with the following:
The data for an OPOS drawer
can be updated, i.e. programmed, changed or cleared, with this program. Data
which has already been stored can also be displayed for information.
Enter the number of the
device under which it is to be stored in the system. The interface and link to
a processing unit should also be defined and the device-specific operating mode
set.
Note:
99 = zero should be selected as device interface for all OPOS devices.
The OPOS modules must have
been installed and configured if OPOS devices are to be operated.
Click on the graphic for
further help with programming of OPOS Devices.
The following description
deals with all available options for update of this basic data.
As with nearly all other
programs the following also applies here:
Entry range permitted:
alphanumeric max. 30 chars.
Note
The entry in this field is optional.
Example:
The OPOS modules are entered as follows in the registration database:
·
HKEY_LOCAL_MACHINE\SOFTWARE\OLEforRetail\
ServiceOPOS\DeviceGroup\DeviceName\
The service
names are listed in program regedit:
The
device names can be found in the left-hand directory in the device group for
the device concerned, e.g. "ADSTopCAshCentralLock".
The
linked service names can be found in the right-hand directory under code "Standard" = "ADSTopCash.CentralLock.1".
Click on the
graphic for further help with programming of OPOS Devices.
Entry range permitted:
alphanumeric max. 30 chars.
Enter the device name of
this OPOS device.
Exmple
The OPOS modules are entered as follows in the registration database:
·
HKEY_LOCAL_MACHINE\SOFTWARE\OLEforRetail\
ServiceOPOS\DeviceGroup\DeviceName
The device names are listed
in program regedit.
The
linked device names can be found in the left-hand directory under the device
group concerned.
Click on the graphic for
further help with programming of OPOS Devices.
Entry range permitted:
numeric 0 - 255
Select one of the offered
debug levels by clicking onto this field and with a second click confirming the
selection.
The system offers the
following debug levels:
Note:
Only select a value
higher than "0" for the debug level if a protocol of communications is
required for error analysis. The details are shown in file "errlog"
in directory work
of the appropriate system unit.
Entry range permitted:
numeric 0 - 9
Enter the number of the
drawer to be used. The value entered here must correspond to the entry in Operator and in the appropriate payment mode, i.e.
the drawer no. entered in program Operator and Payment type will be selected.
Button active: Multithreaded is switched on
Button deactivated: Multithreaded is switched off
This option is dependent on
the connected device and must be activated or deactivated accordingly.