The program description deals with the following:
The data for an OPOS printer can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed for information.
The interface and link to a processing unit should be defined and the device-specific operating mode set.
Note:
99 = zero
should be selected as device interface for all OPOS devices.
The OPOS modules must have already been installed and configured if OPOS devices are to be operated.
Click on the
graphic for further help with programming of OPOS Devices.
The following description deals with all available options for update of this basic data basic data.
As with nearly all other programs the following also applies here:
Entry range permitted: alphanumeric max. 30 chars.
Enter the device name of this OPOS device.
Exmple
The OPOS modules are entered as follows in the registration database:
· HKEY_LOCAL_MACHINE\SOFTWARE\OLEforRetail\ ServiceOPOS\<device group>\<device name>
The device names are listed in program regedit.
Click on the
graphic for further help with programming of OPOS Devices.
Field with firmly defined selection options
Select one of the offered printer models by clicking on this field and with a second click confirming the selection.
The system offers the following printer models:
1 = DvOposEltradeT81
Entry range permitted: numeric, 1 - 255
Only select a value higher than "0" for the debug level if a protocol of the communications is required for error analysis. The details are shown in file "errlog" in directory work of the appropriate system unit.
Entry range permitted: numeric, 1 - 99999999
Default = -1 millisecond
Field with firmly defined selection options
Select one of the offered operation modes by clicking on this field and with a second click confirming the selection.
The system offers the following operation modes:
· Yes (=Default)
· No
Entry range permitted: numeric, 1 - 99999999
Default = 5000 milliseconds
Entry range permitted: numeric, 1 - 99999999
Default = 40 lines
Entry range permitted: numeric, 1 - 99999999
Default = 40 lines
Field with firmly defined selection options
Select one of the offered barcode types by clicking on this field and with a second click confirming the selection.
The system offers the following barcode types:
· Code 39
· ITF (Default)
· Codabar
· Code 93
Entry range permitted: numeric, 1 - 9999
Default = 60 milliseconds
Entry range permitted: numeric, 1 - 9999
Default = 6000 milliseconds
Entry range permitted: numeric, 1 - 9
Default = 0
Entry range permitted: numeric, 1 - 9
Default = 0
Entry range permitted: numeric, 1 – 9
Entry range permitted: alphanumeric, max. 60 pos.
The Vat rates must be entered here in comma separated order, in case the OPOS-service-object does not maintain Vat rates and the Vat rates will directly send to the fiscal printer,
Entry range permitted: alphanumeric, max. 60 pos.
So called "Tax Payer ID", can be used for later settings.
· Debug