The program description deals with the following:
The data for an OPOS keyboard can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed for information.
Enter the no. of the device under which it is to be stored in the system. The interface and link to a processing unit should be defined and the device-specific operating mode set.
Note:
99 = zero should be selected as device interface for all OPOS devices.
The OPOS module must have been installed and configured if OPOS devices are to be operated.
Click on the graphic for further help with programming of an OPOS Device.
The following description deals with all available options for update of this basic data.
As with nearly all other programs the following also applies here:
Entry range permitted: alphanumeric max. 30 chars.
Note
The entry in this field is optional.
Example:
The OPOS modules are entered as follows in the registration database:
· HKEY_LOCAL_MACHINE\SOFTWARE\OLEforRetail\ ServiceOPOS\DeviceGroup\DeviceName\
The service names are listed in program regedit:
The device names can be found in the left-hand directory in the device group for the device concerned, e.g. "ADSTopCAshCentralLock".
The linked service names can be found in the right-hand directory under code "Standard" = "ADSTopCash.CentralLock.1".
Click on the graphic for further help with programming of OPOS Devices.
Entry range permitted: alphanumeric max. 30 chars.
Enter the device name of this OPOS device.
Exmple
The OPOS modules are entered as follows in the registration database:
· HKEY_LOCAL_MACHINE\SOFTWARE\OLEforRetail\ ServiceOPOS\DeviceGroup\DeviceName
The device names are listed in program regedit.
The linked device names can be found in the left-hand directory under the device group concerned.
Click on the graphic for further help with programming of OPOS Devices
Entry range permitted: numeric 0 - 255
Select one of the offered debug levels by clicking onto this field and with a second click confirming the selection.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a protocol of the communications is required for error
analysis. The details are shown in file "errlog" in directory work
of the appropriate system unit.
Entry range permitted: numeric 1 - 9999
The number under which this keyboard is to be/has been stored in the system is entered here.
Enter a free no. in the key fields for programming of a new keyboard.
If changes or clear operations are necessary, the data record should be called up by entering a number in the key fields. If the number is not known, the data record can be selected with Search.
Entry range permitted: numeric 1 - 9999
Enter the number of the OPOS keyboard table which contains the key codes.
Enter a free no. in the key fields for programming of a new type.
If changes or clear operations are necessary, the data record should be called up by entering a number in the key fields. If the number is not known, the data record can be selected with Search.
Note:
One example of the keyboard type
"TOPline" is delivered as "*.asc file" with the MICROS Retail OSCAR POS
standard version If this keyboard is to be used, this data should be read into
the database with "oscar init DvDbOposKeyb" and "oscar
init DvDbOposKeabKey".
Switch active: Multithreaded
is set.
Switch deactivated: Multithreaded is switched off
This option is dependent on the connected device and should be activated or deactivated accordingly.