The program description deals with the following:
The data for an OPOS printer can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed for information.
The interface and link to a processing unit should be defined and the device-specific operating mode set.
Note:
99 = zero
should be selected as device interface for all OPOS devices.
The OPOS modules must have already been installed and configured if OPOS devices are to be operated.
Click on the
graphic for further help with programming of OPOS Devices.
The following description deals with all available options for update of this basic data basic data.
As with nearly all other programs the following also applies here:
Entry range permitted: alphanumeric max. 30 chars.
Note
The entry in this field is optional.
Example:
The OPOS modules are entered as follows in the registration database:
· HKEY_LOCAL_MACHINE\SOFTWARE\OLEforRetail\ ServiceOPOS\DeviceGroup\DeviceName\
The service names are listed in program regedit:
The device names can be found in the left-hand directory in the device group for the device concerned, e.g. "ADSTopCAshCentralLock".
The linked service names can be found in the right-hand directory under code "Standard" = "ADSTopCash.CentralLock.1".
Click on the graphic for further help
with programming of OPOS Devices.
Entry range permitted: alphanumeric max. 30 chars.
Enter the device name of this OPOS device.
Exmple
The OPOS modules are entered as follows in the registration database:
· HKEY_LOCAL_MACHINE\SOFTWARE\OLEforRetail\ ServiceOPOS\DeviceGroup\DeviceName
The device names are listed in program regedit.
The linked device names can be found in the left-hand directory under the device group concerned.
Click on the
graphic for further help with programming of OPOS Device
Field with firmly defined selection options
Select one of the offered debug levels by clicking on this field and with a second click confirming the selection.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for the debug level if a protocol of communications
is required for error analysis. The details are shown in file "errlog"
in directory work of the appropriate system unit.
Default = 1
Field with firmly defined selection options
Select one of the offered options by clicking onto this field and with a second click confirming the selection.
The system offers the following:
Entry range permitted: alphanumeric max. 40 pos.
This field contains a command for print on the receipt of the logo stored in the printer.
Entry range permitted: alphanumeric max. 40 pos.
This field contains a command for print of the logo stored in the printer on the docket.
Entry range permitted: alphanumeric max. 40 pos.
Path and name of BMP file for logo print
A logo can be printed on a receipt instead of the normal receipt heading lines. If logo print is required, the name of the BMP file and, if applicable, the path in relation to the current work directory should be entered here (e.g. work directory = work.10, BMP file in directory xpm; entry = ../xpm/BMP file name)
Please note the following for BMP files:
A BMP file should be created in the appropriate program (e.g. "PAINT" for Windows). A colour depth of 1 bit (=2 colours) should be set.
The size and the ration of the X/Y solution in Pixel is dependent on the printer on which the logo is to be printed.
Default = 437
Enter the number of the valid code page for this device to define the character set to be supported by the connected display.
Click on the graphic for further information on Code page tables.
Entry range permitted: numeric
Default =30 chars.per line
Entry range permitted: numeric
Default =30 chars.per line
Entry range permitted: numeric
Default =66 chars.per line
Entry range permitted: numeric
Default = 100 milliseconds
Button active: Multithreaded
is switched on
Button deactivated: Multithreaded is switched off
This option is dependent on the connected device and must be activated or deactivated accordingly.
Button active: This printer
is used by several POS terminals
Button deactivated: This printer is not used by several
POS terminals.
This option is dependent on the connected device and must be activated or deactivated accordingly.