The program description deals with the following:
The data for connection of radio-controlled terminals, type Orderman Leo und Orderman SOL can be updated, i.e. programmed, changed or cleared, with this program. Data which already exists can also be displayed for information.
Note:
This device contains the functionality from the device Radio Terminal. For new installations the device type Radio Terminal should not be
used anymore , because mixed operation mode with the Orderman type
"Sol" are not supported.
Radio-controlled terminals are operated on a base unit connected up to the System unit, i.e. all radio-controlled terminals are linked to the same interface (COM 1, COM 2, etc.) as the base unit is connected to the system unit.
A processing unit is reserved for each radio-controlled terminal and this allows the device to be used as a remote unit.
Click
onto the graphic for further help with programming of an Orderman device.
The following description deals with all available options for update of this basic data.
As with nearly all other programs the following also applies here:
Field with firmly defined selection options
Select one of the offered debug levels by clicking on this field and with a second click selecting the level required.
The system offers the following:
Note:
Only select a value higher than "0" for
the debug level if a protocol for communication of the device is necessary for
error analysis.
Entry range permitted: numeric 1 - 9999
Enter the address (serial number) of the radio terminal in this field.
Note:
You find the serial number of Orderman when you click on Get more icons and then [about]. This item displays the serial Number of the device. Examp:17419. If you use more than one Orderman device please enter the host name of Oscar server in each Orderman device
How to edit Oscar server host name on Orderman:
Note:
This address number will be also used for the folder name of the Orderman
recources ..\oscar\Hermes [Adresse]. This folder will keep the resources of the
Orderman device which will be checked during each start of Oscar. The resources
in this directory will be send to the Orderman when they have changed
Field with firmly defined selection options
Select one of the offered baud rates by clicking onto this field and with a second click confirming the selection.
The system offers the following baud rates:
Field with firmly defined selection options
Select one of the offered radio-controlled terminal types by clicking onto this field and with a second click confirming the selection.
The system offers the following:
Switch activated: Additional
debug data for error analysis are written to the file "errlog".
Switch deactivated: No additional debug data for error
analysis are written to the file "errlog".
Switch activated: Additional
debug data for error analysis are written to the file "errlog".
Switch deactivated: No additional debug data for error
analysis are written to the file "errlog".
Switch activated: Additional
debug data for error analysis are written to the file "errlog".
Switch deactivated: No additional debug data for error
analysis are written to the file "errlog".
Switch activated: Additional
debug data for error analysis are written to the file "errlog".
Switch deactivated: No additional debug data for error
analysis are written to the file "errlog".
Entry range permitted: numeric 1 - 9999
Enter the number of the Keyboard which is to be/has been linked to this device.
If the number is not known, the data record can be selected with Search.
Note:
The assignment of an keyboard is only for the type "Ordermann Leo"
necessary.
Field with firmly defined selection options
Select one of the offered modes by clicking onto this field and with a second click confirming the selection.
The system offers the following types of operation:
Note:
The assignment of an display is only for the type "Ordermann Leo"
necessary.
Entry range permitted: numeric, default = 2
Enter the number of lines the display supports.
Note:
Entries in this field are only necessary for type "Ordermann Leo".
Entry range permitted: numeric, default = 20
Enter the number of characters supported by this display.
Note:
Entries in this field are only necessary for type "Ordermann Leo".
Entry range permitted: numeric, default = 0
This parameter is only required for Orderman, type B.
Entry range permitted: numeric, 1 - 99999
Default = 25000
This port number will be used to receive UDP-Broadcast-Messages from the Orderman service-station via TCP connection. The default value of 25000 is also the default value of the Orderman device.
Note:
The UDP broadcast port must be deallocated in the
firewall of the operating system.
Entry range permitted: numeric, 1 - 99999
Default = 5000
This value determines for how long the transmitted IP-address by the "HELLO_HOST-Message" is valid. The corresponding service station must answer the "HELLO_CLIENT-answer" during this time with a "GO-Message". Otherwise the corresponding IP-Address of the Orderman device will be lost and the connection will not continue.
Entry range permitted: alphanumeric, max. 20 pos.
Prefix for the path where the folder "data" exist for the Orderman upload data. Each Orderman device has an own folder with a name composed of the path prefix and the address. When the prefix is ../hermes and the address is 12345 the folder data must exist in the folder ../hermes12345. Depending of the upload a checksum file will be created automatically. The upload will be done automatically after turn on of the service station.
All resources of Orderman are located in <oscar> \ HermesResources \ ...
The Orderman surface definitions are saved in the folders:
"<oscar> \ HermesResources \ res \ forms \ (default) \ 0001" - German surface
"<oscar> \ HermesResources \ res \ forms \ (default) \ 0002" - English surface
The number of the file corresponds to the Oscar-Language number each device is automatically created in directory <oscar> \ Hermes [number of Orderman Device]. The checksum file will be generated in the same directory.
The decision for an upload will be done as follow:
Attention!
The Orderman device must be placed in the cradle connected to the network, for loading this data. Loading this data via a radio connection is not possible.
Entry range permitted: numeric, 1 - 999
Default = 100 milliseconds