Remote Devices
Devices
that address a device on a different System Unit
via a network have to be configured as remote
devices.
The
deployment of remote devices
requires that a Process Unit of the program type MICROS Retail OSCAR POS
device has been configured on the system unit to which the device is physically
connected.
![](Remote.gif)
The
following devices can be configured as remote devices.
Proceed
as follows to configure a terminal printer for the remote operation:
- Install a process unit of the type MICROS Retail OSCAR POS DEVICE on the System
Unit to which the terminal printer is physically connected.
- Assign the terminal printer (Epson,
OPOS etc.) to the process unit of the type MICROS Retail OSCAR POS DEVICE and give a name
to the interface to which the printer is connected.
- Assign a device of the type Remote to each
process units of the type MICROS Retail OSCAR POS CLIENT that are to use a terminal
printer.
Install a device of type Remote with an
appropriate device number. Connect this device to the process unit MICROS Retail OSCAR POS
DEVICE and select the device number of the installed terminal printer.
Select 99 = NULL for the device interface.
- In the assigned Printer
Parameter table, define the print options for every Terminal. You can assign different printer
parameter tables to the different terminals.
Proceed in the same way with all other MICROS Retail OSCAR POS clients that are to use
this printer as a terminal printer.
![](sharedprinter.gif)
- TDisplay <DvCustDispSAMRpc>
- TDisplay <DvOrdermanRpc>
- TDrawer <DvCashDrawerRpc>
- TDrawer <DvEpsRpc>
- TDrawer <DvKitchenRpc>
- TModem <DvModemRpc>
- TModem <DvTcpModemRpc>
- TComm <DvBProtRpc>
- TComm <DvPPADSRpc>
Click on the image to return to
the Table of Contents.
MICROS Retail Deutschland GmbH
Salzufer 8
D-10587 Berlin
Germany