The following program description deals with:
The MICROS Retail OSCAR POS application must have a hierarchy structure similar to the organizational structure of business entities for practical and programming reasons.
This structure must be set up before the system is used. The extent of this structure and the levels which must be created depend on the company structure.
The illustrations, Self-Service Sector and Hospitality Sector, show the hierarchy structure. These illustrations indicate the order in which this structure must be formed: If one level is assigned to another level, then the latter must already exist in the system. Despite this requirement, you can exit a maintenance program by left-clicking the appropriate screen button and create a higher organization level.
Integrated terminal systems must be defined in your company, whereby terminals are assigned to companies, branches and profit centers. It is also necessary to define terminal types. The tables (printers, dispensers, etc.) to be connected with the defined terminals must also be specified.
In principal, the following order applies:
Note:
The MICROS Retail OSCAR POS application allows the user to display the terminal
state for all terminals in an installation permanently in a dedicated window.
The operator status and the turnover recorded for this terminal and the status
of server and backup server are displayed in addition to the status Terminal
On/Offline.
Click
on the graphic for further information on setting up the permanent display of Terminal status
This paragraph will provide a short overview over the options available for updating these Basic Data.
Just like in almost any other program:
Permitted input range: numeric, 1 - 9999
Enter the company number to which the terminal should be assigned (at least indirectly through the branch and profit center). The descriptor for the company is displayed in the dropdown box. Input of the company number is required.
If you do not know the number, you can also select the data record via the Search Function.
Permitted input range: numeric, 1 - 99999
Enter the branch number to which the terminal should be assigned (at least indirectly through the profit center). The descriptor for the branch is displayed in the dropdown box. Input of the branch number is required.
If you do not know the number, you can also select the data record via the Search Function.
If the branch is not defined, you can switch to the branch maintenance program by left-clicking the dropdown box next to the arrow symbol to create one.
Permitted input range: numeric, 1 - 999999
Enter any valid unused number for a new terminal. The number must be unique. A terminal can be assigned to only one profit center, but a profit center can have several terminals assigned to it.
To make changes or deletions, retrieve the record by entering appropriate numbers in the indicated key fields. If you do not know a number, you can also select the data record via the Search Function.
Permitted input range: max. 20 alphanumeric characters
Enter the descriptor for a new terminal here. Input of the descriptor is optional.
Be sure that the descriptor is displayed in the dispatcher.
When making changes or deletions, the descriptor is displayed after the terminal number is entered.
Permitted input range: numeric, 1 - 9999
Enter the number for the profit center to which the terminal should be assigned. Several terminals can be assigned to a profit, but only one terminal per profit center.
If you do not know the number, you can also select the data record via the Search Function.
If the profit center is not defined, you can switch to the profit center maintenance program by left-clicking the dropdown box next to the arrow symbol to create one.
Permitted input range: numeric, 1 - 9999
A terminal must be assigned to a terminal type.
Enter the number of the appropriate terminal type for a new terminal.
If you do not know the number, you can also select the data record via the Search Function.
If the terminal type is not defined, you can switch to the Terminal Type maintenance program by left-clicking the dropdown box next to the arrow symbol to create one.
Permitted input range: max. 32 alphanumeric characters
Enter a descriptor for the terminal location here.
Permitted input range: numeric, 1 - 999999
Enter the number of the installation to be assigned here. The installation must be defined before you can create a terminal.
Permitted input range: numeric, 1 - 9999
Enter the number of the process unit to be assigned here. The process unit must be defined before you can create a terminal.
If you do not know the number, you can also select the data record via the Search Function.
If the process unit is not defined, you can switch to the Process Unit maintenance program by left-clicking the dropdown box next to the arrow symbol to create one.
Note:
If your monitor displays the message, ECR record missing, then a terminal was not assigned to the process unit. Check whether the process unit and the terminal are communicating with each other.
Permitted input range: numeric, 1 - 99
Enter the standard value of 1.
Permitted input range: numeric, 1 - 99
Enter the number of the printer table to be assigned, or overwrite the number to edit the record.
If you do not know the number, you can also select the data record via the Search Function.
If the printer table is not defined, you can switch to the Printer Table maintenance program by left-clicking the dropdown box next to the arrow symbol to create the table.
Permitted input range: numeric, 1 - 99
Enter the number of the printer parameter table to be assigned, or overwrite the number to edit the record.
If you do not know the number, you can also select the data record via the Search Function.
If the printer parameter table is not defined, you can switch to the Printer Parameters maintenance program by left-clicking the dropdown box next to the arrow symbol to create the table.
Permitted input range: numeric, 1 - 9999
Enter the number of the stock table to be assigned, or overwrite the number to edit the record. If you do not know the number, you can also select the data record via the Search Function.
Note:
Linkage of a stock table to a terminal is
optional. If the same stock link is to apply to all item in a branch or a
profit center only one stock table needs to be linked to a branch or a profit
center. However, a stock table can be linked to each Profit
center and to each Terminal if a different
stock link is to apply for the same item.
Permitted input range: numeric, 1 - 99
Enter the number of the dispenser table to be assigned, or overwrite the number to edit the record.
If you do not know the number, you can also select the data record via the Search Function.
If the dispenser table is not defined, you can switch to the Dispenser Table maintenance program by left-clicking the dropdown box next to the arrow symbol to create the table.
Permitted input range: numeric, 1 - 99
The number of the respective touch layout must be entered in this field. This number is dependent on the terminal program entered in the linked processing unit.
The following standard touch layouts are provided:
1 |
Standard layout |
2 |
Fast Food Layout |
3 |
Big layout |
4 |
PocketPC layout |
5 |
PocketPC layout_H |
10 |
Standard layout_30 |
11 |
Standard Layout_30L |
12 |
Std layout_30XA |
13 |
Std Layout_30LXA |
14 |
Std layout_30XB |
15 |
Std Layout_30LXB |
20 |
Standard layout_30H |
21 |
Standard Layout_30LH |
22 |
Std layout_30HXA |
23 |
Std Layout_30LHXA |
24 |
Std layout_30HXB |
25 |
Std Layout_30LHXB |
31 |
Std layout_30FXA |
32 |
Std Layout_30FXB |
33 |
|
34 |
Std Layout_30FHXA |
35 |
Std Layout_30FHXB |
41 |
Layout_40_1024 |
42 |
Layout_40_1152 |
Note:
Only certain touch layouts can be linked to
specific Terminal programs.
The layout of your touch screen can be individually customized and assigned a unique number. You can find instructions for this procedure at either Screen Layout Configuration or Installing Touch Screen. Enter the corresponding number in the touch layout field and assign the touch screen layout(s) saved in the system to the terminal.
Please note that user-specific touch layouts can be stored in the database under a number higher than 50. Numbers 1 – 25 are at present reserved for standard layouts.
The appropriate no. is entered in field Touch Layout No. and the link of the appropriate layout(s) to the terminal is/are established.
Click on
the graphic for details of all Screen layouts
available.
Permitted input range: numeric, 1 - 9999
A terminal can also be operated using a PC keyboard. Like other keyboards (e.g. TOPcash, TOPkey, etc.), a PC keyboard must be defined as a Device. You can find help at Terminal PC Keyboard Layout and Terminal PC Keyboard.
Enter the number of the PC keyboard in this field so that you can use it with the terminal. If this type of keyboard is not defined, you can switch to the maintenance program to create the table.
Permitted input range: numeric 1 - 9999
If date and time-controlled articles are to be recorded at the terminal with key <FWDn>, the number of the table for "Article preset day" should be linked in this field. The position nos. of this table are linked to the appropriate article which can be recorded at the terminal with the <FWDn> key.
Note:
Date and time-controlled articles are updated in program Application -> Item
-> "Article preset day".
Permitted input range: numeric, 1 - 9999
Enter the number for the required process unit if you work with immediate billing.
You can find instructions to set up immediate billing at Setting up immediate Billing with a Scheduler.
Permitted input range: numeric, 1 - 9999
Enter the no. of the declared parameter table which is to be linked to this terminal.
If you do not know the number, you can select the data record via the Search function.
If the table has not yet been programmed, you can left-click the arrow to go to program Declared parameter and to create the program.
Note:
The link of declared parameters to a terminal
is only required for declared entry at the terminal and will only be included
if the option Use SSP
declared entry has been set in program Terminaltype
-> Add.data.
Click on the graphic for further help with Declared entry.
Permitted input range: numeric, 1 - 9999
This field keeps the number of the current shift of this POS.
Permitted input range: numeric, 1 - 9999
Enter the number of the process unit which will be used for printing the kitchen receipts.
Click on the graphic for further help with Remote print service.
Permitted input range: numeric, 0 -9
Enter a valid number of the fiscal group to be linked or change the existing one by overwriting.
If the fiscal group has not yet been created, the user can change to the update program Fiscal group with the button to the right of the arrow and the group can then be programmed.
Permitted input range: numeric, 0 - 99
Enter the number of the waiter pen table to be assigned, or overwrite the number to edit the record.
Waiter pen tables are managed in program Application -> Employee -> Waiter Pen Table.
Permitted input range: numeric 0 - 999
Enter in this field the number of the configuration parameter for the SCO interface (SCO = SelfCheckOut).
This parameter is used in MICROS Retail OSCAR POS to configure a terminal for the communication with an according SCO system (Self-Check-Out System)
If the parameter for the SCO configuration is not defined, you can switch to the SCO configuration maintenance program by left-clicking the dropdown box next to the arrow symbol to create one.
Currently the following SCO systems are supported by MICROS Retail OSCAR POS POS:
Notes:
The entry "OSCAR_OPTIONS=: SelfCheckOut" in the file "oscar.ini" is necessary to activate the parameters for the configuration of the Self-Check-Out system.
After changing the environment variable "OSCAR_OPTIONS=" the following commands must be executed to ensure that the changes are activated in MICROS Retail OSCAR POS (convert, addAscFiles, init UiText, init DbText and dofgl.fgl Language).
Entry range permitted: alphanumeric, max. 256 pos.
Enter in this field the URL address for the communication with the FCC (Front Circle Controller)..
Notes:
If the Terminal operates with a Glory Cash recycle system the URL of the FCC
(Front Circle Controller) must be entered in this field. A payment type of
"CashGuard" has to be set up to communicate with the Glory Cash
Infinity System when finalize a receipt.
In program Terminal type the cash recycle parameter must be assigned. This table will hold the parameter and the denomination table for the cash recycle system.
The denomination table will hold the values for the change minimum of coin and banknotes for the Glory Cash Infinty System. If one of the coins or banknotes change is below that change minimum value, the warning message "Float entry" will appear on the pos and the operator will be automatically signed off . In that case the Glory Cash Infinity System must be refilled with coins or banknotes before the operator can sign on again
Attention!
For the use of the Glory Cash Recycle system, the environment variable
"OSCAR_OPTIONS= GloryCA:CashGuard" has to be set in the file
"oscar.ini".
Entry range permitted: alphanumeric, max. 256 pos.
Enter the URL-Address and the port number in this field, for the communication with the Oscar Glory Webservice (e.g. http://10.250.33.180:81).
Permitted input range: numeric, 1 - 9999
Enter the port number in this field, for the communication with the Oscar Glory Webservice.
Permitted input range: numeric 0 - 999
Enter the number of the corresponding text block into this field.
This text will be displayed after the TL-Buttons has been pressed at the till when no item with the option "Check for message after TL" has been booked on the current receipt. The purchase on this receipt can be continued after the event "RETREG" has been executed.
Note:
This field is only available when the environment variable
"OSCAR_OPTIONS=MsgAfterTL" is et in the file "oscar.ini".
Additionally items with option "Check for message after TL"
must be exist in the database. A corresponding text for the message must be
created in program Parameters -> Misc. Param –> Text
Block.
Permitted input range: numeric, 1 - 9999
Enter the number for the 1st preparation area in a fast food configuration. The preparation area must be defined as a Process Unit in the MICROS Retail OSCAR POS system beforehand.
Click
on the image for further help on how to set up a Fast
Food system.
Checkbox selected: The 1st
preparation area assigned to this terminal is activated.
Checkbox cleared: The 1st preparation area assigned to this
terminal is deactivated.
This option is used to activate or deactivate assigned preparation areas. For example, preparation areas that are not occupied or defective can be temporarily deactivated.
Note:
An activated preparation area is automatically
deactivated when a network failure occurs or the system unit cannot be accessed
by the process unit of the preparation area. In this case, this option must be
reactivated by the operator after the error has been corrected.
Preparation areas have an additional switch to set a time limit on screen output. However, this switch has no effect on the option described here.
Permitted input range: numeric, 1 - 9999
Enter the number for the 2nd preparation area in a fast food configuration. The preparation area must be defined as a Process Unit in the MICROS Retail OSCAR POS system beforehand.
Click
the image for further help on how to set up a Fast
Food system.
Checkbox selected: The 2nd
preparation area assigned to this terminal is activated.
Checkbox cleared: The 2nd preparation area assigned to this
terminal is deactivated.
This option is used to activate or deactivate assigned preparation areas. For example, preparation areas that are not occupied or defective can be temporarily deactivated.
Note:
An activated preparation area is automatically
deactivated when a network failure occurs or the system unit cannot be accessed
by the process unit of the preparation area. In this case, this option must be
reactivated by the operator after the error has been corrected.
Preparation have an additional switch to set a time limit on screen output. However, this switch has no effect on the option described here.
Permitted input range: numeric, 1 - 9999
Enter the number for the 3rd preparation area in a fast food configuration. The preparation area must be defined as a Process Unit in the MICROS Retail OSCAR POS system beforehand.
Click
the image for further help on how to set up a Fast
Food system.
Checkbox selected:. The 3rd
preparation area assigned to this terminal is activated.
Checkbox cleared: The 3rd preparation area assigned to this
terminal is deactivated.
This option is used to activate or deactivate assigned preparation areas. For example, preparation areas that are not occupied or defective can be temporarily deactivated.
Note:
An activated preparation area is automatically
deactivated when a network failure occurs or the system unit cannot be accessed
by the process unit of the preparation area. In this case, this option must be
reactivated by the operator after the error has been corrected.
Preparation areas have an additional switch to set a time limit on screen output. However, this switch has no effect on the option described here.
Permitted input range: numeric, 1 - 9999
Enter the number for the wrapping counter assigned to this terminal in a fast food configuration. The wrapping counter must be defined as a Process Unit in the MICROS Retail OSCAR POS system beforehand.
A wrapping counter is optional and serves to verify the posted receipts at a sales terminal. All receipts of the assigned sales terminal are displayed on the monitor of a wrapping counter.
Click
on the image for further help on how to set up a Fast
Food system.
Checkbox selected: The
wrapping counter assigned to this terminal is activated.
Checkbox cleared: The wrapping counter assigned to this terminal is
deactivated.
This option is used to activate or deactivate an assigned wrapping counter. For example, a wrapping counter that is not occupied or defective can be temporarily deactivated.
Note:
An activated wrapping counter is automatically
deactivated when a network failure occurs or the system unit cannot be accessed
by the process unit of the wrapping counter. In this case, this option must be
reactivated by the operator after the error has been corrected.
Wrapping counters have an additional switch to set a time limit on screen output. However, this switch has no effect on the option described here.
Permitted input range: numeric, 1 - 999999
Enter the number for the 2nd sales terminal (called "2nd window proc. unit") which must be defined as a terminal in the MICROS Retail OSCAR POS system beforehand.
A terminal system in a fast food entity usually includes two sales terminals – 1st window proc. unit where the customer order is taken, posted and paid for, and 2nd window proc. unit, where the product is handed to the customer and a follow-up order may be taken.
Click
on the image for further help on how to set up a Fast
Food system.
Permitted input range: numeric, 1 - 9999
Enter the number of the process unit to which a Preparation Print Device is set up.
If you do not know the number, you can also select the data record via the Search Function.
If the process unit is not defined, you can switch to the Process Unit maintenance program by left-clicking the dropdown box next to the arrow symbol to create one.
Note:
When a network failure occurs in the
preparation area and receipts cannot be displayed on the monitor, the
preparation process unit for a printer has these printed instead.
You must set up a key with the PRPOS key event to enable this function.
Permitted input range: numeric, 1 - 9999
Enter the number of the printer where receipts should be printed. Be sure that this printer is assigned to the process unit indicated in the Preparation Print Unit field.
If you do not know the number, you can also select the data record via the Search Function.
If the printer is not defined, you can switch to the Device maintenance program by left-clicking the dropdown box next to the arrow symbol to set one up.
Note:
When a network failure occurs in the
preparation area and receipts cannot be displayed on the monitor, the
preparation process unit for a printer has these printed instead.
You must set up a key with the PRPOS key event to enable this function.
Permitted input range: numeric, 1 - 9999
Enter the number of the foreground color you want to set for the sales monitor.
If you do not know the number, you can also select the data record via the Search Function. The link of each color to a color no. and the name can be found in the Color table.
Note:
The color you select here is also used for the
color setting of buttons at the assigned preparation area and the assigned
wrapping counter. The sales terminal (window proc. unit) where the order was
posted can now be identified by the preparation area and wrapping counter.
Example:
Color setting of the sales terminal (window
proc unit)
Screen display in preparation area
Screen display at wrapping counter
Permitted input range: numeric, 1 - 9999
Enter the number of the background color you want to set for the sales monitor.
If you do not know the number, you can also select the data record via the Search Function. The link of each color to a color no. and the name can be found in the Color table.
Note:
The color you select here is also used for the
color setting of buttons at the assigned preparation area and the assigned
wrapping counter. The sales terminal (window proc. unit) where the order was
posted can now be identified by the preparation area and wrapping counter.
Example:
Color setting of the sales terminal (window
proc. unit)
Screen display in preparation area
Screen display at wrapping counter
Permitted input range: numeric, 0 - 999
Enter the number of the production table you want to assign to this terminal. If this value is unknown, you can find the record by using the search function.
Production areas where items are prepared for an order (kitchen, grill, etc.) are entered in the production table.
By assigning the production table and Production Area in Branch and Item, the corresponding items are sent to the respective production areas when posted at the window proc. unit.
Click
on the image for further help on how to set up a Fast
Food system.
Checkbox selected: The drive
speaker assigned to this terminal is activated.
Checkbox cleared: The drive speaker assigned to this terminal is
deactivated.
Permitted input range: numeric, 0 - 9999
Enter the number for the advertising parameters you want to assign to this terminal to output a particular horizontal scrolling text at a connected customer display (topLOOK).
Advertising parameters are saved with a certain number in the Advertising Parameters maintenance program.
The advertisement text to appear in the customer display is created as advertise text (text group 4200) in the Text Groups maintenance program.
Permitted input range: numeric, 1 - 99
Enter the no. of the safe to which the entry values are to be transferred from declared entry.
If you do not know the number, the data record can be selected via the Search function. Safes are maintained via the button Safe in program Branch.
Note:
Safes can only be linked if the option "Money
from/for terminal" has been activated in program Safe.
Safes without this option activated will not be displayed.
Click on
the graphic for further help with Safe
administration.
Entry range permitted: numeric, 1 - 9999
Geben Sie in dieses Feld die Nummer der Prozesseinheit vom Typ Waagenserver ein.
Klicken
Sie auf die Grafik, um weitere Hilfe zum Einrichten eines Waagenservers zu
erhalten.
Permitted input range: numeric, 1 - 99
Enter no. of safe to which the entry values are transferred during a transfer out operation.
If you do not know the number, the data record can be selected with the Search function. Safes are updated via Safe in program Branch.
Note:
Only safes for which the option "Money
from/for terminal" has been activated in program Safe.
Safes without this option activated will not be displayed.
Click on
the graphic for further help with Safe
administration.
Permitted input range: numeric, 1 - 99
Enter no. of safe to which the entry values are transferred during a float operation.
If you do not know the number, the data record can be selected with the Search function. Safes are updated via Safe in program Branch.
Note:
Only safes for which the option "Money
from/for terminal" has been activated in program Safe.
Safes without this option activated will not be displayed.
Click
on the graphic for further help with Safe
administration.
Permitted input range: numeric 0 -9999
Enter the number of the play list which is to be linked to this terminal for the media customer display.
NOTE:
The environment variable “OSCAR_OPTIONS- MediaDispl” must be entered in file
oscar.ini if the media customer display is to be used.
Note:
The play list is set up in program Application -> System -> User
interface -> Play list and a link can be
established to a branch, a profit center or a terminal. If the same play list
is to apply to all terminals in a branch, it is only necessary to link a play
list to one branch. However, a dedicated play list can be linked to each profit
center and each terminal if this is required.
Click on the graphic for further help with setting up the Media cust.display .
Entry range permitted: numeric, 0 - 9999
In this field the offset of the media customer displays is entered. The coordinates of the Windows system are continuous from the main window to the Media customer display; the media customer displays joins to the right edge of the main window - the offset is thus the width of the main window. This is also the default setting.
Entry range permitted: numeric, 0 - 9999
A value can be entered in this field to define the width of the media customer display. Values 800, 1024 and 1152 in Pixel are permitted. If no entry is made the size of the media customer display is identical to that of the linked terminal.
Entry range permitted: numeric, 0 - 9999
A value can be entered in this field to define the width of the media customer display. Values 600, 768 and 800 in Pixel are permitted. If no entry is made the size of the media customer display is identical to that of the linked terminal.
Entry range permitted: numeric, 0 - 9999
A positions server only needs to be linked to a terminal if the terminals are operated in mode "UK Pub POS" .
Note:
The MICROS Retail OSCAR POS application allows for use of the terminal in a
mode developed specially for the English market, the so-called "UK Pub
POS". In this mode the waiter can open an itemised receipt at a POS and
can automatically call this up after sign-on at another POS. The prerequisite
for this type of operation is link of a positions server to all terminals to be
operated in this way.
Enter the no. of the processing unit which is to be linked as a positions server.
The procedure is as follows:
Entry range permitted: numeric, 0 - 9999
Enter the no. of the CCTV server to which this terminal is to be linked to allow video data for monitoring the operation to be recorded.
Before video monitoring can be introduced at a terminal the appropriate hardware and software for an external CCTV server made by Quadrox must be installed. This system can manage between 1 and 8 cameras.
Note:
The video sequences recorded on the CCTV server can be viewed for every stored
receipt transaction. The viewing is initiated in program Application ->
Sales -> Receipt transactions via button "Video".
Click on the graphic for further help with setting up a CCTV Server.
Entry range permitted: alphanumeric, max. 50 pos.
Enter the ID (GUID = Global-Unit- Identifier) of the camera which is to be responsible for video surveillance at the terminal.
Note:
Before video monitoring can be introduced at a terminal the appropriate
hardware and software for an external CCTV server made by Quadrox must be
installed. This system can manage between 4 and 8 cameras.
Permitted input range: numeric, 1 - 9
Enter a value in this field to define how often the declared entry can be done during an accounting period.
Entry range permitted: numeric, 1 - 9
Enter an operator in this field if this POS is to be used to record time worked for the MICROS WFM system (Workforce management). Please ensure that the operator has the right to sign-on at this terminal.
Click on the graphic for further help with time worked
recording on MICROS WFM.
Entry range permitted: numeric, 0 - 9999
Enter a number in this field to identify the FGL parameter. If this number is not known the data record can be selected via the Search function.
Note:
FGL parameters are updated in program Terminal FGL
parameter and they are used to change the default values in file
"KasseInitGlobals.fgl".
You can send a message to the selected terminal by clicking the mail to terminal button. A window is opened in which you enter the number of the text to be sent. (See description for the text field)
Permitted input range: numeric, 0 - 9999
Enter the number of the text to be sent. If a text to be sent is not registered, then left-click the dropdown box next to the arrow symbol to open the Text window.
If a number is displayed in the field, then delete it to register a new text or just revise the selected text.
Create your text in this field. After the text is saved and the window is closed, you automatically return to the mail to terminal window.
The number of the registered text is now displayed in the field.
Press the send message button, and a dialog box with the question Are you sure? is displayed, which allows you to confirm your selection by clicking the OK button. Otherwise press the abort button.
Note:
Click on the
image for further help on how to set up Message Texts.
Select the terminal to be locked from the dropdown box, and press the lock terminal button. A dialog box with the question Are you sure? is displayed, which allows you to confirm your selection by clicking the OK button. Otherwise press the abort button.
If the terminal is already locked, then a corresponding remark is displayed. You cannot lock the terminal that you are operating.
Select the terminal to be unlocked from the dropdown box, and press the unlock terminal button. A dialog box with the question Are you sure? is displayed, which allows you to confirm your selection by clicking the OK button. Otherwise press the abort button.
If the terminal is already unlocked, then a corresponding remark is displayed.
Checkbox selected: The
terminal is connected to a beverage dispenser.
Checkbox cleared: The terminal is not connected to a beverage dispenser.
If a beverage dispenser is installed in your terminal system, then a virtual terminal must be installed and connected to the dispenser. A virtual terminal does not physically exist, yet it represents itself to the system as being present. As a rule, the beverage terminal is a virtual terminal.
Note:
Checkbox selected: The terminal
functions as a price terminal.
Checkbox cleared: The terminal does not function as a price terminal.
If this option is selected, the sales terminal can be used as a price terminal. Then items can be scanned with a scanner connected to the terminal to display the price of the item. Booking functions are not possible at a price terminal.
Checkbox selected: The
terminal operates as Kiosk system.
Checkbox cleared: The terminal does not operates as a
Kiosk system.
The MICROS Retail OSCAR POS Kiosk system is a terminal serves as a platform for the customer communication, which allows you, among other things, to show advertising messages or hints for special offers.
Beside the function as media of information system, the customer can get information about certain items by simply scanning the item number. Additionally the customer is able to scan his customer card to get information about his current state of loyalty points.
Click on the image for further help on how to set up Kiosk-information-Systems.