unload - Unload media from a device
∕opt∕SUNWsamfs∕sbin∕unload
[
-w
]
eq
SUNWsamfs
Unload the media mounted on device eq. The device specified by eq must be a removable media device or a media changer.
If eq is a removable media device
controlled by a media changer, the medium will be
moved into storage. This command is used when a shutdown of an Oracle HSM file system is
required and a tape is still in a drive. This command is also used in
situations where the system administrator wishes to remove a tape from a
drive that is currently in the unavail
state.
If eq is a media changer, unload
moves catalog entries from
the media changer's catalog to the historian's catalog. The device state for
device eq is set to off
. When the device state for the media
changer is set to on
and the media changer has bar codes, then the
catalog information for that media changer is retrieved from the historian.
If the media changer does not have bar codes, an audit invoked by the
administrator will recover the historian information. This command is
useful for moving tapes in to and out of media changers which do not
have import∕export capabilities, or sense capability for open door. By first
issuing the unload
command, the system administrator can safely open
the door to the media changer, add or remove tapes, close the door, and
re-audit the media changer.
If
-w
is specified, the command will wait for the operation to complete
before terminating.
mcf
The configuration file for Oracle HSM environments
auditslot
(1m),
historian
(7),
load
(1m),
set_state
(1m),
mcf
(4),
sam-robotsd
(1m)