Oracle® ZFS Storage Appliance 관리 설명서, 릴리스 2013.1.5.0

인쇄 보기 종료

업데이트 날짜: 2016년 2월
 
 

CLI를 사용한 초기 구성

CLI를 사용하여 초기 구성 절을 진행합니다. 각 단계는 해당 도움말을 표시하면서 시작되며 help를 입력하면 도움말을 다시 표시할 수 있습니다. 각 단계를 완료하려면 done 명령을 사용합니다.

설치 중 제공한 암호를 사용하여 로그인합니다.

caji console login: root
Password: 
Last login: Sun Oct 19 02:55:31 on console

To setup your system, you will be taken through a series of steps; as the setup
process advances to each step, the help message for that step will be
displayed.

Press any key to begin initial configuration ... 

이 예에서 기존 설정(DHCP 서버에서 얻은 설정)은 done을 입력하여 확인되고 수락됩니다. 이 시점에서 설정을 사용자 정의하려면 각 컨텍스트(데이터 링크, 장치 및 인터페이스)를 입력하고 해당 컨텍스트에 대해 사용 가능한 작업을 확인하기 위해 help를 입력합니다. 자세한 설명은 Network Configuration을 참조하십시오. 클러스터링을 구성하는 경우 Clustering Considerations for Networking 절의 내용에 주의하십시오.

aksh: starting configuration with "net" ... 

Configure Networking. Configure the appliance network interfaces. The first
network interface has been configured for you, using the settings you provided
at the serial console. 

Subcommands that are valid in this context:

   datalinks            => Manage datalinks

   devices              => Manage devices

   interfaces           => Manage interfaces

   help [topic]         => Get context-sensitive help. If [topic] is specified,
                           it must be one of "builtins", "commands", "general",
                           "help" or "script".

   show                 => Show information pertinent to the current context

   abort                => Abort this task (potentially resulting in a
                           misconfigured system)

   done                 => Finish operating on "net"

caji:maintenance system setup net> devices show
Devices:

     DEVICE UP       MAC                      SPEED          
       igb0 true     0:14:4f:8d:59:aa         1000 Mbit/s    
       igb1 false    0:14:4f:8d:59:ab         0 Mbit/s       
       igb2 false    0:14:4f:8d:59:ac         0 Mbit/s       
       igb3 false    0:14:4f:8d:59:ad         0 Mbit/s       

caji:maintenance system setup net> datalinks show
Datalinks:

   DATALINK CLASS          LINKS       LABEL
       igb0 device         igb0        Untitled Datalink

caji:maintenance system setup net> interfaces show
Interfaces:

  INTERFACE STATE  CLASS LINKS       ADDRS                  LABEL
       igb0 up     ip    igb0        192.168.2.80/22        Untitled Interface

caji:maintenance system setup net> done

DNS에 대한 자세한 설명은 DNS를 참조하십시오.

Configure DNS. Configure the Domain Name Service.

Subcommands that are valid in this context:

   help [topic]         => Get context-sensitive help. If [topic] is specified,
                           it must be one of "builtins", "commands", "general",
                           "help", "script" or "properties".

   show                 => Show information pertinent to the current context

   commit               => Commit current state, including any changes

   abort                => Abort this task (potentially resulting in a
                           misconfigured system)

   done                 => Finish operating on "dns"

   get [prop]           => Get value for property [prop]. ("help properties"
                           for valid properties.) If [prop] is not specified,
                           returns values for all properties.

   set [prop]           => Set property [prop] to [value]. ("help properties"
                           for valid properties.) For properties taking list
                           values, [value] should be a comma-separated list of
                           values.

caji:maintenance system setup dns> show
Properties:
                      <status> = online
                        domain = sun.com
                       servers = 192.168.1.4

caji:maintenance system setup dns> set domain=sf.fishworks.com
                        domain = sf.fishworks.com (uncommitted)
caji:maintenance system setup dns> set servers=192.168.1.5
                       servers = 192.168.1.5 (uncommitted)
caji:maintenance system setup dns> commit
caji:maintenance system setup dns> done
aksh: done with "dns", advancing configuration to "ntp" ...

어플라이언스 시간 시계를 동기화하려면 NTP(Network Time Protocol)를 구성합니다. 자세한 설명은 NTP를 참조하십시오.

Configure Time. Configure the Network Time Protocol.

Subcommands that are valid in this context:

    help [topic]         => Get context-sensitive help. If [topic] is specified,
                           it must be one of "builtins", "commands", "general",
                           "help", "script" or "properties".

   show                 => Show information pertinent to the current context

   commit               => Commit current state, including any changes

   abort                => Abort this task (potentially resulting in a
                           misconfigured system)

   done                 => Finish operating on "ntp"

   enable               => Enable the ntp service

   disable              => Disable the ntp service

   get [prop]           => Get value for property [prop]. ("help properties"
                           for valid properties.) If [prop] is not specified,
                            returns values for all properties.

   set [prop]           => Set property [prop] to [value]. ("help properties"
                           for valid properties.) For properties taking list
                           values, [value] should be a comma-separated list of
                           values.

caji:maintenance system setup ntp> set servers=0.pool.ntp.org
                       servers = 0.pool.ntp.org (uncommitted)
caji:maintenance system setup ntp> commit
caji:maintenance system setup ntp> done
aksh: done with "ntp", advancing configuration to "directory" ...

자세한 설명은 다음을 참조하십시오.

Configure Name Services. Configure directory services for users and groups. You
can configure and enable each directory service independently, and you can
configure more than one directory service.

Subcommands that are valid in this context:

   nis                  => Configure NIS

   ldap                 => Configure LDAP

   ad                   => Configure Active Directory

   help [topic]         => Get context-sensitive help. If [topic] is specified,
                           it must be one of "builtins", "commands", "general",
                           "help" or "script".

   show                 => Show information pertinent to the current context

   abort                => Abort this task (potentially resulting in a
                           misconfigured system)

   done                 => Finish operating on "directory"

caji:maintenance system setup directory> nis
caji:maintenance system setup directory nis> show
Properties:
                      <status> = online
                        domain = sun.com
                     broadcast = true
                     ypservers = 

caji:maintenance system setup directory nis> set domain=fishworks
                        domain = fishworks (uncommitted)
caji:maintenance system setup directory nis> commit
caji:maintenance system setup directory nis> done
caji:maintenance system setup directory> done
aksh: done with "directory", advancing configuration to "support" ...

기본 데이터 중복성으로 특성화되는 스토리지 풀을 구성하고 모든 파일 시스템 및 LUN에서 공유되는 공간을 제공합니다. 자세한 설명은 Storage Configuration을 참조하십시오.

Configure Storage.

Subcommands that are valid in this context:

    help [topic]         => Get context-sensitive help. If [topic] is specified,
                          it must be one of "builtins", "commands", "general",
                          "help", "script" or "properties".

    show                 => Show information pertinent to the current context

    commit               => Commit current state, including any changes

    done                 => Finish operating on "storage"

    config <pool>        => Configure the storage pool

    unconfig             => Unconfigure the storage pool

    add                  => Add additional storage to the storage pool

    import               => Search for existing or destroyed pools to import

    scrub <start|stop>   => Start or stop a scrub

    get [prop]           => Get value for property [prop]. ("help properties"
                          for valid properties.) If [prop] is not specified,
                          returns values for all properties.

    set pool=[pool]      => Change current pool

caji:maintenance system setup storage> show
Properties:
                          pool = pool-0
                        status = online
                       profile = mirror
                   log_profile = -
                 cache_profile = -
caji:maintenance system setup storage> done
aksh: done with "storage", advancing configuration to "support" ...

원격 지원 구성에 대한 자세한 설명은 Phone Home을 참조하십시오.

Remote Support. Register your appliance and configure remote monitoring.

Subcommands that are valid in this context:

   tags                 => Configure service tags

   scrk                 => Configure phone home

   help [topic]         => Get context-sensitive help. If [topic] is specified,
                           it must be one of "builtins", "commands", "general",
                           "help" or "script".

   show                 => Show information pertinent to the current context

   abort                => Abort this task (potentially resulting in a
                           misconfigured system)

   done                 => Finish operating on "support"

 caji:maintenance system setup support> done
 aksh: initial configuration complete!