Go to main content

Oracle® Server X7-8 Service Manual

Exit Print View

Updated: April 2018
 
 

Servicing PCIe Cards and Carriers (CRU)

This section describes how to service PCIe cards. The PCIe cards are located at the back of the server. The server PCIe cards are housed in pairs inside card carriers called DPCCs (Dual PCIe Card Carriers). The DPCCs allow the cards to be hot serviced (removed and installed while the server is powered on). The following topics and procedures provide information to assist you when removing and installing PCIe cards:

PCIe cards are customer-replaceable units (CRUs). For more information about CRUs, see Illustrated Parts Breakdown and Customer-Replaceable Units. Refer to your PCIe card documentation for complete software and cabling information about your card. For component serviceability, locations, and designations, see Replaceable Components.


Caution

Caution  -  Customers should not use the procedures in this section to service the two Oracle Storage 12 Gb SAS PCIe RAID HBA, Internal cards that are located in SMODs. The Oracle Storage 12 Gb SAS PCIe RAID HBA, Internal cards are field-replaceable units (FRUs) and should be serviced only by authorized Oracle Service personnel. See Servicing the Host Bus Adapter (HBA) Card (FRU).



Caution

Caution  -  These procedures require that you handle components that are sensitive to electrostatic discharge. This sensitivity can cause the components to fail. To avoid damage, ensure that you follow antistatic practices as described in Electrostatic Discharge and Static Prevention Measures.



Note -  Exadata X7-8 servers do not require a shut down to replace a PCIe card. Refer to Performing a Hot-Pluggable Replacement of a Flash Disk" in the Exadata Database Machine Maintenance Guide at https://docs.oracle.com/cd/E80920_01/DBMMN/toc.htm.

Note -  For a complete list of supported PCIe cards, refer to Supported PCIe Cards in Oracle Server X7-8 Product Notes at https://www.oracle.com/goto/x7-8/docs.