System Messages: TMQ Catalog 1200-1299


1205	ERROR: Invalid high threshold type
	Description	While executing the qcreate or qchange command, an invalid upper threshold value was specified (the suffix was not valid). The threshold value must be a number suffixed with 'b', 'B', '%', or 'm'.
	Action	Re-enter the qcreate or qchange command using an appropriate threshold value.
	See Also	`tmqadmin`(1)
1207	ERROR: Invalid high threshold number
	Description	While executing the qcreate or qchange command, an upper threshold value of 0 was specified, or a percentage greater than 100 was given.
	Action	Re-enter the qcreate or qchange command using an appropriate threshold value.
	See Also	`tmqadmin`(1)
1210	ERROR: High and low threshold types do not match
	Description	While executing the qcreate or qchange command, the suffix on the upper threshold value doesn't match the suffix on the lower threshold value.
	Action	Re-enter the qcreate or qchange command using appropriate threshold values.
	See Also	`tmqadmin`(1)
1212	ERROR: Low threshold must be less than high threshold
	Description	While executing the qcreate or qchange command, the lower threshold value is larger than the upper threshold value.
	Action	Re-enter the qcreate or qchange command using appropriate threshold values such that the lower value is less than the upper threshold value.
	See Also	`tmqadmin`(1)
1215	*ERROR: Threshhold command length must be less than len* characters**
	Description	While executing the qcreate or qchange command, the threshold command was too long (that is, len characters or more).
	Action	Re-enter the command with a threshold command that is 128 characters or less in length.
	See Also	`tmqadmin`(1)
1216	ERROR: Queue creation failed for queue name
	Description	While executing the qcreate command, tmqadmin failed to create the specified queue. There are many possible reasons for the failure and the specific reason is written to the standard output or the userlog.
	Action	Re-enter the command when the problem has been resolved.
	See Also	`tmqadmin`(1)
1221	WARN: Priority not changed
	Description	While changing message priorities with the qchangeprio command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.
	Action	No action required.
	See Also	`tmqadmin`(1)
1223	*ERROR: Queue name length must be less than len* characters**
	Description	While executing the qchangequeue command, the queue name was too long (that is, len characters or more).
	Action	Re-enter the command with a queue name that is 15 characters or less in length.
	See Also	`tmqadmin`(1)
1224	ERROR: Queue name must be specified
	Description	While executing the qdestroy command, the queue name was not entered at the prompt or an empty string was specified on the command line.
	Action	Re-enter the qdestroy command specifying a valid queue name.
	See Also	`tmqadmin`(1)
1226	WARN: Queue not changed
	Description	While changing the queue on which messages are queued with the qchangequeue command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.
	Action	No action required.
	See Also	`tmqadmin`(1)
1228	ERROR: Invalid time format
	Description	While executing the qchangetime command, an invalid date and time value was specified.
	Action	Re-enter the qchangetime command using a valid date/time value. The value must be of the form `YY[MM[DD[HH[MM[SS]]]]]` (that is, 2 digits for year, and optionally 2 digits each for the month, date, hour, minute, and second), with an optional '+' prefix to indicate a relative value.
	See Also	`tmqadmin`(1)
1230	WARN: Time not changed
	Description	While changing message execution time with the qchangetime command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.
	Action	No action required.
	See Also	`tmqadmin`(1)
1232	WARN: Messages not deleted
	Description	While deleting messages with the qdeletemsg command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.
	Action	No action required.
	See Also	`tmqadmin`(1)
1233	ERROR: Cannot specify the -p and -f options together
	Description	While executing the qdestroy command, both the -p and -f options were specified.
	Action	Re-enter the qdestroy command with either the -p or -f option but not both.
	See Also	`tmqadmin`(1)
1234	ERROR: Cannot specify the -p and -f options together
	Description	While executing the qdestroy command, both the -p and -f options were specified.
	Action	Re-enter the qdestroy command with either the -p or -f option but not both.
	See Also	`tmqadmin`(1)
1237	WARN: Queue not destroyed
	Description	While destroying a message queue with the qdestroy command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.
	Action	No action required.
	See Also	`tmqadmin`(1)
1238	ERROR: Failed to destroy queue queue
	Description	While executing the qdestroy command, tmqadmin failed to destroy the specified queue, queue. There are many possible reasons for the failure and the specific reason is written to the standard output or the userlog.
	Action	Re-enter the command when the problem has been resolved. If the command fails because other processes are attached to the queue space, the -f option can be specified to force destroying the queue. If the command fails because there are messages on the queue, the -p option can be specified to purge the queue and destroy it.
	See Also	`tmqadmin`(1)
1241	ERROR: Failed to open queue space queue_space_name on config config
	Description	While executing the qopen command, tmqadmin failed to open the specified queue space, queue_space_name, on the configuration device config. There are many possible reasons for the failure and the specific reason is written to the userlog.
	Action	Check the userlog for the specific reason for failure. Re-enter the command when the problem has been resolved.
	See Also	`tmqadmin`(1)
1246	WARN: Transaction not aborted
	Description	While heuristically aborting a transaction with the qaborttrans command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.
	Action	No action required.
	See Also	`tmqadmin`(1)
1250	WARN: Transaction not committed
	Description	While heuristically committing a transaction with the qcommittrans command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.
	Action	No action required.
	See Also	`tmqadmin`(1)
1256	ERROR: Invalid time format
	Description	While executing the qscan command, an invalid date and time value was specified.
	Action	Re-enter the qscan command using a valid date/time value. The value must be of the form YY[MM[DD[HH[MM[SS]]]]] (that is, 2 digits for year, and optionally 2 digits each for the month, date, hour, minute, and second).
	See Also	`tmqadmin`(1)
1257	ERROR: Invalid time format
	Description	While executing the qscan command with a range of date/time values, an invalid date and time value was specified for the second value.
	Action	Re-enter the qscan command using a valid date/time value. The value must be of the form YY[MM[DD[HH[MM[SS]]]]] (that is, 2 digits for year, and optionally 2 digits each for the month, date, hour, minute, and second). A range of date/time values is two date/time values separated by a hyphen.
	See Also	`tmqadmin`(1)
1258	ERROR: Invalid priority
	Description	While executing the qscan command, an invalid priority value was specified.
	Action	Re-enter the qscan command using a valid priority value. The value must be numeric in the range 1-100, inclusive.
	See Also	`tmqadmin`(1)
1259	ERROR: Invalid priority
	Description	While executing the qscan command, an invalid range of priority values was specified.
	Action	Re-enter the qscan command using a valid priority value. A priority value must be numeric in the range 1-100, inclusive, and a range of priorities is two priority values separated by a hyphen.
	See Also	`tmqadmin`(1)
1260	ERROR: Invalid message id
	Description	While executing the qscan command, an invalid message identifier value was specified.
	Action	Re-enter the qscan command using a valid message identifier value. The value must be a string, less than 33 characters in length, with backslash and non-printable characters entered as a backslash followed by a two-character hexadecimal value for the character.
	See Also	`tmqadmin`(1)
1261	ERROR: Invalid correlation id
	Description	While executing the qscan command, an invalid correlation identifier value was specified.
	Action	Re-enter the qscan command using a valid correlation identifier value. The value must be a string, less than 33 characters in length, with backslash and non-printable characters entered as a backslash followed by a two-character hexadecimal value for the character.
	See Also	`tmqadmin`(1)
1262	*ERROR: Queue name length must be less than len* characters**
	Description	While executing the qset command, the queue name was too long (that is, len characters or more).
	Action	Re-enter the command with a queue name that is 15 characters or less in length.
	See Also	`tmqadmin`(1)
1279	ERROR: Must specify queue space name
	Description	While executing the qspacecreate command, the queue space name specified is the null string (that is, the name was entered on the command line as "", or return was entered for the prompt for the Queue Space Name).
	Action	Re-enter the qspacecreate command with the correct queue space name.
	See Also	`tmqadmin`(1)
1280	*ERROR: Queue space name length must be less than len* characters**
	Description	While executing the qspacecreate command, the queue space name was too long (that is, len characters or more).
	Action	Re-enter the command with a queue space name that is 15 characters or less in length.
	See Also	`tmqadmin`(1)
1282	*ERROR: Queue name length must be less than length* characters in old queue space**
	Description	For Oracle Tuxedo release older than 11gR1, the queue name must be less than length. The length queue name has increased to 127 from Oracle TUXEDO 11gR1 and above: however, it is not allowed to create, change queue with long names if the opened queue space is created by earlier Oracle TUXEDO releases.
	Action	Correct the value of queue name with a name less than length and retry the action.
	See Also	`tmqadmin`(1)
1284	*ERROR: Error queue name length must be less than length* characters in old queue space**
	Description	For Oracle Tuxedo release older than 11gR1, the queue name must be less than length. The length queue name is enlared to 127 from TUXEDO 11gR1 and above, but it is not allowed to change error queue with long names if the opened queue space is created by earlier Oracle TUXEDO releases.
	Action	Correct the value of error queue name with a name less than length and retry the action.
	See Also	`tmqadmin`(1)
1294	*ERROR: Error queue name length must be less than len* characters**
	Description	While executing the qspacecreate command, the error queue name was too long (that is, len characters or more).
	Action	Re-enter the command with an error queue name that is 15 characters or less in length.
	See Also	`tmqadmin`(1)
1295	ERROR: Queue space creation failed
	Description	While executing the qspacecreate command, tmqadmin failed to create the specified queue space. There are many possible reasons for the failure and the specific reason is written to the standard output or the userlog.
	Action	Re-enter the command when the problem has been resolved.
	See Also	`tmqadmin`(1)
1298	WARN: Queue space not destroyed
	Description	While destroying a queue space with the qspacedestroy command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.
	Action	No action required.
	See Also	`tmqadmin`(1)