3.5 Installing the Mounting Brackets Onto Oracle Exalytics In-Memory Machine

You must install the mounting brackets onto the Oracle Exalytics In-Memory Machine before you can rackmount it.

To install the mounting brackets, complete the following steps:

1. Position a mounting bracket against the chassis so that the slide-rail lock is at the Oracle Exalytics In-Memory Machine front, and the five keyhole openings on the mounting bracket are aligned with the five locating pins on the side of the chassis, as shown in Figure 3-2.

   Note:

   The mounting brackets are identical and can be installed on either side of the chassis.

   Figure 3-2 Installing the Mounting Brackets

   
   Description of "Figure 3-2 Installing the Mounting Brackets"
2. With the heads of the five chassis locating pins protruding though the five keyhole openings in the mounting bracket, pull the mounting bracket toward the front of the chassis until the mounting bracket clip locks into place with an audible click, as shown in Figure 3-2.
3. Verify that the rear locating pin has engaged the mounting bracket clip.
4. Repeat to install the remaining mounting bracket on the other side of the Oracle Exalytics In-Memory Machine.