Fusion Middleware Control Help for WebLogic Server

Previous Next Open TOC in new window
Content starts here

Domain Partition Application Deployment: Administration: Connection Pool

Configuration Options     Advanced Configuration Options     

The connection pool within a JDBC data source contains a group of JDBC connections that applications reserve, use, and then return to the pool. The connection pool and the connections within it are created when the connection pool is registered, usually when starting up WebLogic Server or when deploying the data source to a new target.

Use this page to define the configuration for this data source's connection pool.

Configuration Options

Name Description
Data Source Name

The name of the JDBC data source.

Database URL

The URL of the database to connect to. The format of the URL varies by JDBC driver.

The URL is passed to the JDBC driver to create the physical database connections.

MBean Attribute (Does not apply to application modules) :
JDBCDriverParamsBean.Url

Changes take effect after you redeploy the module or restart the server.

Password

The password attribute passed to the JDBC driver when creating physical database connections.

The value is stored in an encrypted form in the descriptor file and when displayed in an administration console.

MBean Attribute (Does not apply to application modules) :
JDBCDriverParamsBean.Password

Changes take effect after you redeploy the module or restart the server.

Properties

The list of properties passed to the JDBC driver that are used to create physical database connections. For example: server=dbserver1. List each property=value pair on a separate line.

To enable driver-level features, add the driver property and its value to the Properties list. WebLogic Server sets driver-level properties in the Properties list on the driver's ConnectionPoolDataSource object.

MBean Attribute (Does not apply to application modules) :
JDBCDriverParamsBean.Properties

Changes take effect after you redeploy the module or restart the server.

System Properties

The list of system properties names passed to the JDBC driver that are used to create physical database connections. For example: server=dbserver1. List each property=value pair on a separate line.

MBean Attribute (Does not apply to application modules) :
JDBCPropertyBean.SysPropValue

Changes take effect after you redeploy the module or restart the server.

Initial Capacity

The number of physical connections to create when creating the connection pool in the data source. If unable to create this number of connections, creation of the data source will fail.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.InitialCapacity

Minimum value: 0

Maximum value: 2147483647

Maximum Capacity

The maximum number of physical connections that this connection pool can contain.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.MaxCapacity

Minimum value: 1

Maximum value: 2147483647

Minimum Capacity

The minimum number of physical connections that this connection pool can contain after it is initialized.

  • Default: InitialCapacity

  • Used only for connection pool shrinking calculations.

  • For compatibility, InitialCapacity is used if MinCapacity is not configured.

  • Once a data source has gone through a suspend/resume, the larger value of either MinCapacity or InitialCapacity is used.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.MinCapacity

Minimum value: 0

Maximum value: 2147483647

Statement Cache Type

The algorithm used for maintaining the prepared statements stored in the statement cache.

Options are:

  • LRU - when a new prepared or callable statement is used, the least recently used statement is replaced in the cache.

  • FIXED - the first fixed number of prepared and callable statements are cached.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.StatementCacheType

Changes take effect after you redeploy the module or restart the server.

Statement Cache Size

The number of prepared and callable statements stored in the cache. (This may increase server performance.)

WebLogic Server can reuse statements in the cache without reloading the statements, which can increase server performance. Each connection in the connection pool has its own cache of statements.

Setting the size of the statement cache to 0 turns off statement caching.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.StatementCacheSize

Minimum value: 0

Maximum value: 1024

Advanced Configuration Options

Name Description
Test Connections On Reserve

Enables WebLogic Server to test a connection before giving it to a client. (Requires that you specify a Test Table Name.)

The test adds a small delay in serving the client's request for a connection from the pool, but ensures that the client receives a viable connection.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.TestConnectionsOnReserve

Test Frequency

The number of seconds a WebLogic Server instance waits between attempts when testing unused connections. (Requires that you specify a Test Table Name.) Connections that fail the test are closed and reopened to re-establish a valid physical connection. If the test fails again, the connection is closed.

In the context of multi data sources, this attribute controls the frequency at which WebLogic Server checks the health of data sources it had previously marked as unhealthy.

When set to 0, the feature is disabled.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.TestFrequencySeconds

Minimum value: 0

Maximum value: 2147483647

Test Table Name

The name of the database table to use when testing physical database connections. This name is required when you specify a Test Frequency and enable Test Reserved Connections.

The default SQL code used to test a connection is select count(*) from TestTableName

Most database servers optimize this SQL to avoid a table scan, but it is still a good idea to set the Test Table Name to the name of a table that is known to have few rows, or even no rows.

If the Test Table Name begins with SQL, then the rest of the string following that leading token will be taken as a literal SQL statement that will be used to test connections instead of the standard query. For example: SQL BEGIN; Null; END;

For an Oracle database, you can reduce the overhead of connection testing by setting Test Table Name to SQL PINGDATABASE which uses the pingDatabase() method to test the Oracle connection. For any JDBC 4.0 database, it is possible to use "SQL ISVALID" to use the isValid() method on the connection.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.TestTableName

Seconds to Trust an Idle Pool Connection

The number of seconds within a connection use that WebLogic Server trusts that the connection is still viable and will skip the connection test, either before delivering it to an application or during the periodic connection testing process.

This option is an optimization that minimizes the performance impact of connection testing, especially during heavy traffic.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.SecondsToTrustAnIdlePoolConnection

Minimum value: 0

Maximum value: 2147483647

Shrink Frequency

The number of seconds to wait before shrinking a connection pool that has incrementally increased to meet demand.

When set to 0, shrinking is disabled.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.ShrinkFrequencySeconds

Minimum value: 0

Maximum value: 2147483647

Init SQL

SQL statement to execute that will initialize newly created physical database connections. Start the statement with SQL followed by a space.

If the Init SQL value begins with "SQL ", then the rest of the string following that leading token will be taken as a literal SQL statement that will be used to initialize database connections. If the Init SQL value does not begin with "SQL ", the value will be treated as the name of a table and the following SQL statement will be used to initialize connections:

"select count(*) from InitSQL"

The table InitSQL must exist and be accessible to the database user for the connection. Most database servers optimize this SQL to avoid a table scan, but it is still a good idea to set InitSQL to the name of a table that is known to have few rows, or even no rows.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.InitSql

Changes take effect after you redeploy the module or restart the server.

Login Delay

The number of seconds to delay before creating each physical database connection. This delay supports database servers that cannot handle multiple connection requests in rapid succession.

The delay takes place both during initial data source creation and during the lifetime of the data source whenever a physical database connection is created.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.LoginDelaySeconds

Minimum value: 0

Maximum value: 2147483647

Changes take effect after you redeploy the module or restart the server.

Connection Creation Retry Frequency

The number of seconds between attempts to establish connections to the database.

If you do not set this value, data source creation fails if the database is unavailable. If set and if the database is unavailable when the data source is created, WebLogic Server will attempt to create connections in the pool again after the number of seconds you specify, and will continue to attempt to create the connections until it succeeds.

When set to 0, connection retry is disabled.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.ConnectionCreationRetryFrequencySeconds

Minimum value: 0

Maximum value: 2147483647

Inactive Connection Timeout

The number of inactive seconds on a reserved connection before WebLogic Server reclaims the connection and releases it back into the connection pool.

You can use the Inactive Connection Timeout feature to reclaim leaked connections - connections that were not explicitly closed by the application. Note that this feature is not intended to be used in place of properly closing connections.

When set to 0, the feature is disabled.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.InactiveConnectionTimeoutSeconds

Minimum value: 0

Maximum value: 2147483647

Maximum Waiting for Connection

The maximum number of connection requests that can concurrently block threads while waiting to reserve a connection from the data source's connection pool.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.HighestNumWaiters

Minimum value: 0

Maximum value: 2147483647

Connection Reserve Timeout

The number of seconds after which a call to reserve a connection from the connection pool will timeout.

When set to 0, a call will never timeout.

When set to -1, a call will timeout immediately.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.ConnectionReserveTimeoutSeconds

Minimum value: -1

Maximum value: 2147483647

Statement Timeout

The time after which a statement currently being executed will time out.

StatementTimeout relies on underlying JDBC driver support. WebLogic Server passes the time specified to the JDBC driver using the java.sql.Statement.setQueryTimeout() method. If your JDBC driver does not support this method, it may throw an exception and the timeout value is ignored.

A value of -1 disables this feature.

A value of 0 means that statements will not time out.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.StatementTimeout

Minimum value: -1

Maximum value: 2147483647

Changes take effect after you redeploy the module or restart the server.

Ignore In-Use Connections

Enables the data source to be shutdown even if connections obtained from the pool are still in use.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.IgnoreInUseConnectionsEnabled

Changes take effect after you redeploy the module or restart the server.

Pinned-To-Thread

Enables an option to improve performance by enabling execute threads to keep a pooled database connection even after the application closes the logical connection.

When enabled:

  • WebLogic Server pins a database connection from the connection pool to an execution thread the first time an application uses the thread to reserve a connection. When the application finishes using the connection and calls connection.close(), WebLogic Server keeps the connection with the execute thread and does not return it to the connection pool. When an application subsequently requests a connection using the same execute thread, WebLogic Server provides the connection already reserved by the thread.

  • There is no locking contention on the connection pool that occurs when multiple threads attempt to reserve a connection at the same time. There is no contention for threads that attempt to reserve the same connection from a limited number of database connections.

  • If an application concurrently reserves more than one connection from the connection pool using the same execute thread, WebLogic Server creates additional database connections and pins them to the thread.

  • The maximum capacity of the connection pool (maximum number of database connections created in the connection pool) becomes the number of execute threads used to request a connection multiplied by the number of concurrent connections each thread reserves. This may exceed the Maximum Capacity specified for the connection pool. You may need to consider this larger number of connections in your system design and ensure that your database allows for additional associated resources. If your system cannot handle the additional resource requirements or if you see database resource errors after enabling PinnedToThread, Oracle recommends not using PinnedToThread. See Using Pinned-To-Thread Property to Increase Performance.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.PinnedToThread

Changes take effect after you redeploy the module or restart the server.

Remove Infected Connections Enabled

Specifies whether a connection will be removed from the connection pool after the application uses the underlying vendor connection object.

If you disable removing infected connections, you must make sure that the database connection is suitable for reuse by other applications.

When set to true (the default), the physical connection is not returned to the connection pool after the application closes the logical connection. Instead, the physical connection is closed and recreated.

When set to false, when the application closes the logical connection, the physical connection is returned to the connection pool and can be reused by the application or by another application.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.RemoveInfectedConnections

Changes take effect after you redeploy the module or restart the server.

Wrap Data Types

By default, data type objects for Array, Blob, Clob, NClob, Ref, SQLXML, and Struct, plus ParameterMetaData and ResultSetMetaData objects are wrapped with a WebLogic wrapper. This allows for features like debugging and connection usage to be done by the server.

The wrapping can be turned off by setting this value to false. This improves performance, in some cases significantly, and allows for the application to use the native driver objects directly.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.WrapTypes

Changes take effect after you redeploy the module or restart the server.

Fatal Error Codes

Specifies a comma-separated list of error codes that are treated as fatal errors. These errors include deployment errors that cause a server to fail to boot and connection errors that prevent a connection from being put back in the connection pool.

This optional attribute is used to define fatal error codes, that when specified as the exception code within a SQLException (retrieved by sqlException.getErrorCode()), indicate that a fatal error has occurred and the connection is no longer usable. For Oracle databases the following fatal error codes are predefined within WLS and do not need to be placed in the configuration file:

  • 3113: "end-of-file on communication channel"

  • 3114: "not connected to ORACLE"

  • 1033: "ORACLE initialization or shutdown in progress"

  • 1034: "ORACLE not available"

  • 1089: "immediate shutdown in progress - no operations are permitted"

  • 1090: "shutdown in progress - connection is not permitted"

  • 17002: "I/O exception"

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.FatalErrorCodes

Changes take effect after you redeploy the module or restart the server.

Connection Labeling Callback

The class name of the connection labeling callback. This is automatically passed to registerConnectionLabelingCallback when the datasource is created. The class must implement oracle.ucp.ConnectionLabelingCallback.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.ConnectionLabelingCallback

Changes take effect after you redeploy the module or restart the server.

Connection Harvest Max Count

The maximum number of connections that may be harvested when the connection harvesting occurs. The range of valid values is 1 to MaxCapacity.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.ConnectionHarvestMaxCount

Minimum value: 1

Connection Harvest Trigger Count

Specifies the number of available connections (trigger value) used to determine when connection harvesting occurs.

  • Harvesting occurs when the number of available connections is below the trigger value for a connection pool.

  • The range of valid values is -1 to MaxCapacity.

  • Default value is -1.

  • Setting the value to -1 disables connection harvesting.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.ConnectionHarvestTriggerCount

Minimum value: -1

Connection Count of Refresh Failures Till Disable

Specifies the number of reconnect failures allowed before WebLogic Server disables a connection pool to minimize the delay in handling the connection request caused by a database failure. Zero means it is disabled.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.CountOfRefreshFailuresTillDisable

Minimum value: 0

Count of Test Failures Till Flush

Specifies the number of test failures allowed before WebLogic Server closes all unused connections in a connection pool to minimize the delay caused by further database testing. Zero means it is disabled.

MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.CountOfTestFailuresTillFlush

Minimum value: 0


Back to Top