Securing the Workstation to the Adjustable Stand

The adjustable stand is a mounting option for each configurations of the Workstation 6 Series. When using this option, ensure that the workstation is properly secured to the adjustable stand.
  1. Place the workstation adjustable stand on its back and connect the AC power cable from the wall outlet.

    This figure shows the AC power socket on the bottom of the Adjustable Stand.
  2. Place the Adjustable Stand upright.
  3. Tilt back the Adjustable Stand mount.
  4. Place the workstation on the mount so that the nubs rest on the mount.

    This figure shows placement of the Workstation 6 on the Adjustable Stand.
  5. Lay the workstation on the mount and pull it toward you until you hear a click.
  6. Make sure the quick release pin is depressed. If it is not depressed, you must pull the workstation toward you until it clicks in place.

    This figure shows the quick release pin for the Workstation 6.
  7. If you want to secure the workstation to the Adjustable Stand, install the security screw.

    This figure shows the security screw placement for securing the Workstation 6 to the Adjustable Stand.
  8. Connect the DC power cable to the workstation head unit.

    This figure shows the DC power cable connection to the Workstation 6.
  9. Use the Velcro under the stand cover to organize cables.

Parent topic: Workstation Setup