Unmounting the Workstation 6

  1. Disconnect all cables from the I/O ports.
  2. Tilt the workstation head unit back to angle the I/O ports up.
  3. Disconnect the DC power cable.

    This figures depicts disconnecting the DC power cable
  4. If you secured the workstation to the adjustable stand using a security screw, remove the security screw.

    This figures shows the location of the security screw.
  5. Pull down the quick release pin, and then gently push the workstation head unit.

    This figure depicts pulling down the quick release pin.
  6. Slide the workstation head unit all the way back, and then lift to unmount.

Parent topic: Troubleshooting