Installing the 10-Inch Customer Display with Pole Mount

  1. To attach the 10-Inch Customer Display with Pole Mount to a cash drawer or other surface without a cable routing hole:
    1. Tighten the pole base plate captive screws, if required.
    2. Use pliers or similar tool to break off a cable routing tab located along the rear edge of the pole base plate.
    3. Guide the cables through the tab opening in the base plate.
    4. Attach the 10-Inch Customer Display with Pole Mount to the cash drawer or other surface using the four #8-32 base plate screws.
  2. To attach the 10-Inch Customer Display with Pole Mount to surfaces with a cable routing hole:
    1. Tighten the pole base plate captive screws, if required.
    2. Guide the cables through cable routing hole.
    3. Attach the 10-Inch Customer Display with Pole Mount to the surface using the four #8-32 base plate screws.
  3. Connect the 10-Inch Customer Display with Pole Mount power cord to the Workstation 6 Series I/O panel.
  4. Connect the 10-Inch Customer Display HDMI cable to the USB-C male to HDMI female video adapter cable, and then connect the USB-C male to HDMI female video adapter cable to the Workstation 6 Series I/O panel. The USB-C male to HDMI female video adapter (part number 7602485) is an optional part available from Oracle.
  5. To power on the 10-Inch Customer Display with Pole Mount, press the power button on the rear of the unit.