Installing the 10-Inch Customer Display with High Mount on the Workstation 6 Series Adjustable Stand

To install the 10-Inch Customer Display with High Mount on the Workstation 6 Series Adjustable Stand:

1. Place the Adjustable Stand upright on a flat surface, and then tilt the mounting plate upwards to a vertical position.
2. Remove the High-Mount slot cover.
3. Slide the 10-Inch Customer Display power cord through the High-Mount slot and down through the mounting plate.
4. Insert the display and bracket assembly into the High-Mount slot. The bracket should be firmly locked into place.
5. To adjust or remove, press the release button on the bottom of the bracket to unlock.
6. Secure the display and bracket assembly to the Adjustable Stand using the provided security screws (2) and a No. 2 (1/4”) Phillips screwdriver.
7. Connect the 10-Inch Customer Display with High Mount power cord to the Workstation 6 Series I/O panel.
8. Connect the 10-Inch Customer Display HDMI cable to the USB-C male to HDMI female video adapter cable, and then connect the USB-C male to HDMI female video adapter cable to the Workstation 6 Series I/O panel. The USB-C male to HDMI female video adapter (part number 7602485) is an optional part available from Oracle.