multiconfig-port

使用 multiconfig-port 命令最多可以配置两个额外的端口。这些端口可以是 IB 端口，也可以是 40 GbE 以太网端口。

语法

set multiconfig-port slot/port [–port-type={gwEthernet10GbPort|gwEthernet40GbPort|ibPort}]
show multiconfig-port slot/* [–detail]

其中，slot/port 是物理插槽编号/端口号。

选项

选项 说明 –detail 显示端口的详细信息。可选。 –port-type 指定端口的类型： gwEthernet10GbPort－10 GbE 端口 gwEthernet40GbPort－40 GbE 端口 ibPort－InfiniBand 端口

示例：配置额外的以太网端口

此示例展示了如何添加一个 4 端口 40 GbE 卡，然后将端口类型更改为 10GbE。

[OFOS] add iocard 7 gwEthernet4Port40GbCard
[OFOS] show iocard 7 ioport
name  type                 state              descr   mode    lag   access-vlan  guid 
-------------------------------------------------------------------------------------
7/1   gwEthernet40GbPort   up/indeterminate           trunk         1            0
7/2   gwEthernet40GbPort   up/indeterminate           trunk         1            0
7/3   gwEthernet40GbPort   up/indeterminate           trunk         1            0
7/4   gwEthernet40GbPort   up/indeterminate           trunk         1            0
[OFOS] set multiconfig-port 7/1 -port-type=gwEthernet10GbPort
[OFOS] show iocard 7 ioport
name  type                 state               descr  mode    lag   access-vlan  guid
-------------------------------------------------------------------------------------
7/1   gwEthernet10GbPort   up/indeterminate           trunk         1            0
7/2   gwEthernet10GbPort   up/indeterminate           trunk         1            0
7/3   gwEthernet10GbPort   up/indeterminate           trunk         1            0
7/4   gwEthernet10GbPort   up/indeterminate           trunk         1            0