After hotplugging an Intel-manufactured PCIe card into the server using the hotswap command, the fwupdate command cannot show detailed information about the card. After using the hotswap command, the fwupdate command can no longer access the PCI mappings on the device. An Intel-supplied utility fails to gather information about the hotplugged card, so it cannot pass this information to the fwupdate command.
The supported Intel-manufactured PCIe cards are as follows:
Sun Quad Port GbE PCIe 2.0 Low Profile Adapter, UTP
Oracle Quad Port 10GBase-T Adapter
Oracle Quad 10Gb or Dual 40Gb Ethernet Adapter
Oracle Flash Accelerator F640 PCIe Card: 6.4 TB, NVMe PCIe 3.0
Recovery
Reboot the server containing the Intel-manufactured PCIe card.