The Connection Status page displays information in a multi-pane format. This table describes elements on the Connection Status page.
Table 4-1 Connection Status Top Pane View Grid Columns
Field Name | Description |
---|---|
Server Name | Name of the local MP server. |
Automatic Connections Count |
x of y in Service x = Number of Automatic Connections that are InService or Degraded y = Total number of Automatic Connections |
Configured Connections Count |
x of y in Service x = Number of Configured Connections that are InService or Degraded y = Total number of Configured Connections |
A report can be generated for any server on the Overall tab as described in Connection Status Report section.
When a server is selected from the top pane, associated peer servers are shown in the bottom pane as described in Table 4-2.
Table 4-2 Connection Status Bottom Pane View Grid Columns
Field Name | Description |
---|---|
Peer Server Name | All servers – local and remote – that have connections to this server are listed. |
Peer Server IP Address | The IP address of the peer server that displays may be IPv4 or IPv6 based on the established connection. |
Connection Status |
Down – Connection is down. Forming – Connection attempt has been made. Aligning – Connection Alignment is in progress. LocallyBlocked – Connection is locally blocked. RemotelyBlocked – Connection is blocked at remote side. TotallyBlocked – Connection is locally as well as remotely blocked. InService – Connection is InService and available to send user traffic. Degraded – Connection is available to send user traffic but is congested. |
Admin Connection State |
Report – Enabled when a server is selected in the top pane. Select between a Summary report and a Detailed report. |
Buttons are enabled when a peer server is selected in the bottom pane. Enabled – The administrator has enabled this connection. This is the default value. Disabled – The administrator has disabled this connection. System does not try to establish this connection. Blocked – Connections in Blocked state do not exchange Communication Agent messages. |
|
Connection Type |
The type of connection to this server. Auto – This is an automatic connection. Configured – This is a connection to a configured Remote server. |
Date Last Updated | Time when the connection status was last updated. |