システム・メッセージ: WSNATカタログ1200-1299
|
1200 |
INFO: .SysClientState: User usrname on LMID state change to state | |
|
Description |
This message indicates that the client specified above changed to a new state. A complete listing of the current attributes of the client are sent in the posted buffer. |
Action |
This is an informational message. | |
See Also |
| |
1201 |
WARN: .SysClientSecurity: User usrname on LMID authentication failure | |
|
Description |
This message indicates that the client specified above failed security validation when trying to join the application. A complete listing of the current attributes of the client are sent in the posted buffer. |
Action |
Check to make sure that this is not some hacker trying to gain access to your application data. | |
See Also |
| |
1206 |
ERROR: Memory allocation failure error_info | |
|
Description |
An attempt dynamically to allocate memory from the operating system failed while trying to compress a message. Additional information about the problem is printed as part of the message. |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1207 |
エラー: -cオプションの引数は数値である必要があります | |
|
説明 |
数値以外の引数が |
アクション |
| |
関連項目 |
| |
1215 |
エラー: -kオプションの引数は数値である必要があります | |
|
説明 |
数値以外の引数が |
アクション |
| |
関連項目 |
| |
1216 |
ERROR: Expected numeric argument to | |
|
Description |
The |
Action |
Change the | |
1217 |
ERROR: Expected numeric argument to | |
|
Description |
The |
Action |
Change the | |
1218 |
ERROR: The | |
|
Description |
minport must be less than or equal to maxport, and both must be less than or equal to 65535. |
Action |
Change the | |
1219 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
TCPポート番号を追跡するためのデータ構造体の作成中に、システムでメモリー不足が発生しました。 |
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
1220 |
エラー: 使用可能なポートの残りがありません | |
|
説明 |
ワークステーション・リスナーが、 |
アクション |
| |
1221 |
ERROR: Could not establish listening address address | |
|
Description |
The workstation listener has tried all TCP ports within the range specified by the |
Action |
If there are more workstation handlers than ports available in the range specified by | |
1222 |
エラー: -zオプションの引数は数値である必要があります | |
|
説明 |
ワークステーション・リスナーの |
アクション |
| |
1223 |
エラー: -Zオプションの引数は数値である必要があります | |
|
説明 |
ワークステーション・リスナーの |
アクション |
| |
1224 |
エラー: リンク・レベル暗号化アドオン・パッケージがインストールされていません | |
|
説明 |
暗号化ビット数の最小値がゼロより大きいにもかかわらず、このマシンにはリンク・レベル暗号化アドオン・パッケージがインストールされていません。 |
アクション |
リンク・レベル暗号化パッケージをインストールするか、最小暗号化ビット数( | |
1229 |
警告: 暗号化ネゴシエーションに失敗したクライアントがあります | |
|
説明 |
ワークステーション・クライアントがシステムへのログインを試行しましたが、許容される暗号化レベルをネゴシエーションできませんでした。 |
アクション |
ワークステーション・クライアントは、システムにログインする際にワークステーション・リスナーと暗号化強度をネゴシエーションします。クライアントとリスナーが暗号化のレベルに合意できない場合(たとえば、ワークステーション・リスナーが128ビットの暗号化を要求し、クライアントが40ビットの暗号化のみを使用できる場合)、このメッセージが表示されます。管理者は、ワークステーション・リスナーまたはワークステーション・クライアントの暗号化ポリシーを変更できます。 | |
1230 |
エラー: セキュリティ・プロトコルが無効です | |
|
説明 |
ワークステーション・リスナーがセキュアでない状態で、無効なopcodeが試行されました。 |
アクション |
悪質な使用がないか、ネットワークを監視してください。Oracleカスタマ・サポートに連絡してください。 | |
1231 |
エラー: メモリー割当てエラー | |
|
説明 |
Diffie-Hellmanパラメータのネゴシエーション中に、ワークステーション・リスナーでメモリー不足が発生しました。 |
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
1232 |
エラー: 暗号化ネゴシエーション・プロトコル・エラー | |
|
説明 |
ワークステーション・リスナーがセキュアでない状態で、無効なopcodeが試行されました。 |
アクション |
悪質な使用がないか、ネットワークを監視してください。Oracleカスタマ・サポートに連絡してください。 | |
1233 |
エラー: 暗号化ハンドルを取得できません | |
|
説明 |
Diffie-Hellmanパラメータのネゴシエーション中に暗号化ハンドルを取得しようとしましたが、ワークステーション・リスナーでエラーが発生しました。 |
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
1234 |
エラー: ネゴシエーション・パラメータを確立できません | |
|
説明 |
ワークステーション・リスナーがセキュアでない状態で、無効なopcodeが試行されました。 |
アクション |
悪質な使用がないか、ネットワークを監視してください。Oracleカスタマ・サポートに連絡してください。 | |
1235 |
エラー: ネゴシエーション・パラメータを送信できません | |
|
説明 |
Diffie-Hellmanパラメータをクライアントに送信しようとしましたが、エラーが発生しました。 |
アクション |
ネットワークでエラーが発生したか、セキュリティ・パケットを待機するクライアントが強制終了された可能性があります。どちらのイベントも発生していない場合は、Oracleカスタマ・サポートに連絡してください。 | |
1236 |
エラー: 暗号化を開始できません | |
|
説明 |
共有鍵の確立後、暗号化を開始する際にエラーが発生しました。 |
アクション |
悪質な使用がないか、ネットワークを監視してください。Oracleカスタマ・サポートに連絡してください。 | |
1237 |
ERROR: tpnotify(TPACK) failed to reply, tperrno = tperrno | |
|
Description |
The workstation handler sent an acknowledged unsolicited message to a client. However, that client never sent its acknowledgment. |
Action |
The network may have experienced an error, or the client waiting for the notification may have been killed. | |
1238 |
エラー: セキュリティ・パラメータが無効です | |
|
説明 |
ワークステーション・リスナーの暗号化レベルがゼロ・ビットより大きいにもかかわらず、このマシンにはリンク・レベル暗号化パッケージがインストールされていません。 |
アクション |
| |
1239 |
エラー: セキュリティ・パラメータが無効です | |
|
説明 |
ワークステーション・リスナーの暗号化レベルが40ビットより上ですが、このマシンにインストールされているのは40ビットのリンク・レベル暗号化パッケージのみです。 |
アクション |
| |
1240 |
ERROR: Failed to read server table entry, tperrno = tperrno | |
|
Description |
The workstation listener was rebooting after a failure and could not read the server table. |
Action |
The bulletin board may be corrupted. | |
1241 |
エラー: tpbroadcast()またはtpnotify()コールへの応答をクライアントに送信できませんでした | |
|
説明 |
ワークステーション・ハンドラがワークステーション・クライアントから確認を受信しましたが、 |
アクション |
| |
1242 |
ERROR: Bad Internet type of listening address provided: address | |
|
Description |
|
Action |
Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Change | |
1243 |
エラー: -Hオプションの16進値の長さは偶数である必要があります | |
|
説明 |
アドレスが0xで始まる場合、アドレス長の文字数が偶数であることが必要です。 |
アクション |
16進の1文字は1ニブル(4ビット)を表します。1バイトは8ビットです。1バイトを完全に指定するには、2文字必要です。文字数が偶数になるようにアドレスを変更してください。 | |
1244 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
1245 |
ERROR: Bad hexadecimal number provided for external address: address | |
|
Description |
The hexadecimal address address from the |
Action |
Any address which starts with 0x must be a valid hexadecimal address. Valid hexadecimal characters are 0 - 9, a-f and A-F. Change | |
1246 |
ERROR: Bad Internet type of external address provided: address | |
|
Description |
The Internet address address from the |
Action |
Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Change address to comply with the known formats. | |
1247 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
1248 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
1249 |
エラー: -Hと-nに異なる長さのネットワーク・アドレスが指定されています | |
|
説明 |
外部アドレスを使用する場合、そのアドレスの書式は |
アクション |
| |
1250 |
ERROR: External address can not be resolved val | |
|
Description |
The Domain Name Service could not resolve the address given by the |
Action |
Make sure that the Domain Name Service knows the server represented by the address given in the | |
1251 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
1252 |
エラー: ライセンス・レベルを判定できません | |
|
説明 |
ワークステーション・リスナーの-c引数の値を検証する際に現在のライセンス属性を取得しようとしましたが、エラーが発生しました。 |
アクション |
Oracleカスタマ・サポートに連絡してください。 | |
1253 |
エラー: ワークステーション・データ圧縮が構成されていますが、必要なライセンスがありません | |
|
説明 |
ワークステーション圧縮を使用するためのライセンスがありません。 |
アクション |
ワークステーション圧縮のライセンスを購入してください。ワークステーション圧縮のライセンスを所有しており、インストール済の場合は、Oracleカスタマ・サポートに連絡してください。 | |
1254 |
エラー: 会話型シーケンス番号が間違っています | |
|
説明 |
会話は保護のために順序付けされます。会話型メッセージの1つが順序を無視して届きました。この会話は切断されており、トランザクションがアクティブだった場合は |
アクション |
ユーザー・ログを参照して、ワークステーション・ハンドラ用メッセージ・キューへのメッセージ送信を | |
1255 |
WARN: Couldn't change to client context num, continuing | |
|
Description |
An internal error was encountered while attempting to switch client contexts. |
Action |
Contact Oracle Customer Support. | |
1256 |
WARN: .SysClientSecurity: User user on machine authentication failure | |
|
Description |
This is the system event message which is posted when a user fails authentication. |
Action |
The action depends on the security policy of the user. | |
1257 |
エラー: 受信メッセージ用のバッファを作成できませんでした | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
1258 |
警告: ハンドラにクライアント・コンテキストのスペースがありません | |
|
説明 |
汎用ハンドラで最大数のクライアントが使用されました。 |
アクション |
システムが許容するクライアントの合計数を増やすか、許容限度に達しているシステムに接続しないようにしてください。 | |
1259 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
1260 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
1261 |
ERROR: tpinit() failed, tperrno = tperrno | |
|
Description |
A client was unable to enter the system from the generic handler. The tperrno may give clues as to the cause of this failure. |
Action |
Contact Oracle Customer Support. | |
1262 |
ERROR: tpchkauth() failed, tperrno = tperrno | |
|
Description |
|
Action |
Contact Oracle Customer Support. | |
1263 |
WARN: Forced shutdown of client; user name 'name'; client name 'client' | |
|
Description |
A forced shutdown of the given user name and client name has been performed by the generic handler. |
Action |
None. | |
1264 |
WARN: .SysClientDied: User user on machine client died | |
|
Description |
This is the event posted when a forced shutdown of the given user name on machine has been performed by the generic handler. |
Action |
None. | |
1265 |
エラー: メッセージを受信する際にエラーが発生しました。tperrno=TPEOS、Uunixerr=UMSGRCV | |
|
説明 |
メッセージ・キューの読取り中に汎用ハンドラでオペレーティング・システム・エラーが発生しました。 |
アクション |
システムの健全性を確認してください。Oracleカスタマ・サポートに連絡してください。 | |
1266 |
ERROR: Received message of type 'type' to tpinit() call | |
|
Description |
The only message type which tpinit takes is |
Action |
Ensure all clients of the generic handler provide the proper buffer type during | |
1267 |
エラー: セキュリティを要するアプリケーションではtpinit()呼出し時にTPINIT情報を渡す必要があります | |
|
説明 |
セキュアなアプリケーションでは、tpinitに |
アクション |
セキュアなアプリケーションでのtpinitの実行時には、汎用ハンドラのすべてのクライアントによって | |
1268 |
ERROR: Invalid client name given 'client'. | |
|
Description |
The given client is invalid in the application. |
Action |
Ensure that the | |
1269 |
エラー: TPINIT構造に対して無効な長さが指定されました | |
|
説明 |
汎用ハンドラによって無効な |
アクション |
| |
1270 |
エラー: レジストリ表情報の更新に失敗しました | |
|
説明 |
汎用ハンドラがOracle Tuexdoシステムのレジストリ情報を更新できませんでした。 |
アクション |
Oracleカスタマ・サポートに連絡してください。 | |
1271 |
ERROR: Failed to send message to authentication server, tperrno = tperrno | |
|
Description |
The generic handler was not able to send the |
Action |
Ensure that the authentication server is up and running, and that the | |
1272 |
警告: 無効な通知オプションが指定されました。TPU_IGNにリセットします。 | |
|
説明 |
汎用ハンドラによってクライアントからの通知オプションが処理されません。 |
アクション |
すべてのクライアントで、汎用ハンドラによる受入れが可能な値に、通知オプションが変更されることを確認してください。 | |
1273 |
INFO: .SysClientState: User user on machine state change to state | |
|
Description |
This event is posted by the generic handler whenever the user on machine changes state. The new state is given in state. |
Action |
None. | |
1274 |
INFO: Abortively disconnecting workstation client user[user], client[client] | |
|
Description |
The generic handler is disconnecting a client which is believed to be dead. |
Action |
None. | |
1275 |
INFO: Userid: [userid], Clientid: [clientid] timed out due to inactivity | |
|
Description |
The generic handler timed out the given userid and clientid. |
Action |
None. | |
1276 |
ERROR: Received message with unknown release number value | |
|
Description |
The |
Action |
If this error happens consistently, then contact Oracle Customer Support. | |
1277 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
mallocを使用してオペレーティング・システムから動的にメモリーを割り当てようとしましたが、 |
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
1278 |
エラー: アドレス変換エラーです | |
|
説明 |
|
アクション |
このエラーが常に発生する場合は、Oracleカスタマ・サポートに連絡してください。 | |
1279 |
エラー: 記述子割当てエラーです | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
1280 |
ERROR: Could not initialize network (error) | |
|
Description |
The |
Action |
Ensure that the network is viable on the machine. If the network is viable, contact Oracle Customer Support. | |
1281 |
ERROR: Could not initialize global information (error) | |
|
Description |
The |
Action |
Ensure that the network is viable on the machine. If the network is viable, contact Oracle Customer Support. | |
1282 |
ERROR: Failed to initialize network protocol information (error) | |
|
Description |
The |
Action |
Ensure that the network is viable on the machine. If the network is viable, contact Oracle Customer Support. | |
1283 |
ERROR: Network error (error) servicing network event | |
|
Description |
The |
Action |
Ensure that the network is viable on the machine. If the network is viable, contact Oracle Customer Support. | |
1284 |
WARN: Failed to allocate a network resource (error) | |
|
Description |
The |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1285 |
エラー: -Nオプションの引数は数値である必要があります | |
|
説明 |
|
アクション |
| |
1286 |
エラー: -Kの引数は、client、handler、both、noneのいずれかである必要があります | |
|
説明 |
|
アクション |
| |
1287 |
WARN: Forced shutdown of client; user name 'name'; client name 'name'; workstation address 'xxx.xxx.xxx.xxx' | |
|
Description |
This may result from shutting down a |
Action |
If | |
1288 |
警告: SO_KEEPALIVEのためのsetsockopt()が失敗しました | |
|
説明 |
|
アクション |
このエラーは無視され、 | |
関連項目 |
| |
1289 |
警告: KEEPALIVEオプションがリクエストされましたが、このプラットフォームでは使用できません | |
|
説明 |
|
アクション |
このエラーは無視され、 | |
関連項目 |
| |
1290 |
ERROR: Can't parse the address address | |
|
Description |
While attempting to resolve address, an error occurred. |
Action |
Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the host name and port number portion of address can be located by your server. | |
1291 |
ERROR: Can't resolve host name in address address | |
|
Description |
While attempting to resolve the host name portion of address, an error occurred. |
Action |
Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the host name portion of address can be located by your DNS server. | |
1292 |
ERROR: Unknown address type: address | |
|
Description |
The given address does not correspond to a type known by the system. |
Action |
The Oracle TUXEDO System understands several types of address format. Addresses which start with // must be Internet addresses. Addresses which start with 0x are hexadecimal representations of the address. Other formats may or may not be understood by the Oracle TUXEDO system. | |
1293 |
ERROR: Can't resolve port number in address address | |
|
Description |
While attempting to resolve the port number portion of address, an error occurred. |
Action |
Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the port number portion of address can be located by your server. | |
1294 |
ERROR: Can't convert the address address to binary format | |
|
Description |
An error occurred while converting address to an internal binary representation. |
Action |
Contact Oracle Customer Support. | |
1295 |
ERROR: Illegal character in the address address | |
|
Description |
There is an illegal character in the port portion of address. Ports may only have alphanumeric characters. |
Action |
Remove the illegal character from the port portion of the address. | |
1296 |
ERROR: Missing port number in the address address | |
|
Description |
address must have a port number portion. |
Action |
Supply a port number portion in the given address. Otherwise, the | |
1297 |
ERROR: Port number cant be bigger than value in the address address | |
|
Description |
The port number portion of address is larger than the largest allowable port number of value. |
Action |
Change the port number to be within the specified range. | |
1298 |
エラー: TUXDIR環境変数が設定されていません | |
|
説明 |
|
アクション |
| |
関連項目 |
|