Before you can configure SR-IOV virtual functions, you must enable I/O virtualization for the PCIe bus while the root domain is in a delayed reconfiguration. Reboot the domain to make this change take effect.
This procedure must be performed only one time per root complex. The root complex must be running as part of the same SP configuration.
primary# ldm start-reconf root-domain-name
Perform this step only if I/O virtualization is not enabled already for the bus that has the physical function.
Run one of the following commands:
primary# ldm set-io iov=on bus
primary# ldm add-io iov=on bus
Run one of the following commands:
primary# ldm stop-domain -r root-domain
primary# shutdown -i6 -g0 -y