Fusion Middleware Control Help for WebLogic Server

Resource Group Template: Services: Messaging: JMS Servers

Buttons     Column Display     

This page summarizes the JMS servers that have been configured in this resource group template.

Buttons

Name	Description
Create	Creates a new JMS server.
Delete	Deletes the selected JMS server.

Column Display

You can show fewer or additional data points on this page by expanding Customize this table and modifying the Column Display list. Each data point displays in its own table column.

The following table lists all of the data points that you can display in columns on this page.

Name	Description
Name	The name of this JMS server.
Health	The health state of this JMS server. MBean Attribute: JMSServerRuntimeMBean.HealthState
Health Reason	The description of the event associated with the health state of this JMS server.
Persistent Store	The file or database in which this JMS server stores persistent messages. If unspecified, the JMS server uses the default persistent store that is configured on each targeted WebLogic Server instance. If the JMS server has a store configured, then the configured store is used to store persistent messages. The disk-based file store or JDBC-accessible database store that you specify must be targeted to the same server, cluster, or migratable target instance as this JMS server. Multiple services on the same WebLogic Server instance, including multiple JMS servers, may share the same persistent store. Each service's persistent data will be kept apart. If you specify a PersistentStore, the deprecated Store field must not be set. If neither the PersistentStore field nor the Store field are set, the JMS server supports persistent messaging using the default persistent store for the targeted WebLogic Server instance. MBean Attribute: JMSServerMBean.PersistentStore Changes take effect after you redeploy the module or restart the server.
Temporary Template Resource	The name of a JMS module that contains a template that this JMS server can use to create temporary destinations. Entering a JMS module name requires you to specify a temporary template name. However, a module name cannot be specified if the Hosting Temporary Destinations field is disabled. MBean Attribute: JMSServerMBean.TemporaryTemplateResource
Temporary Template Name	The name of a configured JMS template that this JMS server uses to create temporary destinations. Entering a template name, requires you to specify the JMS module that contains this template. However, a template name cannot be specified if the Hosting Temporary Destinations field is disabled. Note: If the specified JMS template provides persistent store values, they are ignored because temporary destinations do not support persistent messaging. MBean Attribute: JMSServerMBean.TemporaryTemplateName
Bytes Maximum	The maximum number of bytes that can be stored in this JMS server. A value of -1 removes any WebLogic Server limits. Because excessive bytes volume can cause memory saturation, Oracle recommends that this maximum corresponds to the total amount of system memory available after accounting for the rest of your application load. Range of Values: >= BytesThresholdHigh MBean Attribute: JMSServerMBean.BytesMaximum Minimum value: -1 Maximum value: 9223372036854775807
Messages Maximum	The maximum number of messages that can be stored in this JMS server. A value of -1 removes any WebLogic Server limits. Because excessive message volume can cause memory saturation, Oracle recommends that this value corresponds to the total amount of system memory available after accounting for the rest of your application load. Range of Values: >= MessagesThresholdHigh. MBean Attribute: JMSServerMBean.MessagesMaximum Minimum value: -1 Maximum value: 9223372036854775807
Bytes Threshold High	The upper threshold (number of bytes stored in this JMS server) that triggers flow control and logging events. A value of -1 disables the events for this JMS server. The triggered events are: Log Messages - A message is logged on the server indicating a high threshold condition. Flow Control - If flow control is enabled, the JMS server becomes armed and instructs producers to begin decreasing their message flow. Range of Values: <= BytesMaximum; >= BytesThresholdLow MBean Attribute: JMSServerMBean.BytesThresholdHigh Minimum value: -1 Maximum value: 9223372036854775807
Bytes Threshold Low	The lower threshold (number of bytes stored in this JMS server) that triggers flow control and logging events. A value of -1 disables the events for this JMS server. If the number of bytes falls below this threshold, the triggered events are: Log Messages - A message is logged on the server indicating that the threshold condition has cleared. Flow Control - If flow control is enabled, the JMS server becomes disarmed and instructs producers to begin increasing their message flow. Range of Values: <= BytesThresholdHigh MBean Attribute: JMSServerMBean.BytesThresholdLow Minimum value: -1 Maximum value: 9223372036854775807
Messages Threshold High	The upper threshold (number of messages stored in this JMS server) that triggers flow control and logging events. A value of -1 disables the events for this JMS server. If the number of messages exceeds this threshold, the triggered events are: Log Messages - A message is logged on the server indicating a high threshold condition. Flow Control - If flow control is enabled, the JMS server becomes armed and instructs producers to begin decreasing their message flow. Range of Values: <= MessagesMaximum; >= MessagesThresholdLow. MBean Attribute: JMSServerMBean.MessagesThresholdHigh Minimum value: -1 Maximum value: 9223372036854775807
Messages Threshold Low	The lower threshold (number of messages stored in this JMS server) that triggers flow control and logging events. A value of -1 disables the events for this JMS server. If the number of messages falls below this threshold, the triggered events are: Log Messages - A message is logged on the server indicating that the threshold condition has cleared. Flow Control - If flow control is enabled, the JMS server becomes disarmed and instructs producers to begin increasing their message flow. Note: This attribute is dynamically configurable. Range of Values: <= MessagesThresholdHigh MBean Attribute: JMSServerMBean.MessagesThresholdLow Minimum value: -1 Maximum value: 9223372036854775807
Maximum Message Size	The maximum number of bytes allowed in individual messages on this JMS server. The size of a message includes the message body, any user-defined properties, and the user-defined JMS header fields JMSCorrelationID and JMSType. The maximum message size is only enforced for the initial production of a message. Messages that are redirected to an error destination or forwarded to a member of a distributed destination are not checked for size. For instance, if a destination and its corresponding error destination are configured with a maximum message size of 128K bytes and 64K bytes, respectively, a message of 96K bytes could be redirected to the error destination (even though it exceeds the 64K byte maximum), but a producer could not directly send the 96K byte message to the error destination. Note: Any change to this maximum affects only incoming messages; stored messages are not affected. MBean Attribute: JMSServerMBean.MaximumMessageSize Minimum value: 0 Maximum value: 2147483647
Expiration Scan Interval	The number of seconds between this JMS server's cycles of scanning local destinations for expired messages. A value of 0 disables active scanning. A very large scan interval effectively disables active scanning. With scanning disabled, users still do not receive expired messages and any expired messages that are discovered by other system activities are removed. However, expired messages sitting in idle destinations (such as an inactive queue or disconnected durable subscriber) are not removed and continue to consume system resources. The scanning cycle for expired messages occurs as follows: After the specified waiting period, the JMS server devotes a separate thread to scan all of its local destinations for expired messages. After the scanning is completed, all located expired messages are processed according to the specified Expiration Policy on the destination (Discard, Log, or Redirect). The entire process repeats after another specified waiting period. Note: Because a new scan does not start until the current one is finished and until the specified waiting period ends, an expired message could still remain in the system for the maximum scan waiting period plus the amount of time it takes to perform the scan. MBean Attribute: JMSServerMBean.ExpirationScanInterval Minimum value: 0 Maximum value: 2147483647
Blocking Send Policy	Determines whether the JMS server delivers smaller messages before larger ones when a destination has exceeded its maximum number of messages. FIFO prevents the JMS server from delivering smaller messages when larger ones are already waiting for space. Preemptive allows smaller send requests to preempt previous larger ones when there is sufficient space for smaller messages on the destination. This policy is defined only for the JMS server; it cannot be set on individual destinations. Additional information on the FIFO and Preemptive policies is provided below. FIFO (first in, first out) indicates that all send requests for the same destination are queued up one behind the other until space is available. No send request is permitted to successfully complete if there is another send request waiting for space before it. When space is limited, the FIFO policy prevents the starvation of larger requests because smaller requests cannot continuously use the remaining available space. Smaller requests are delayed, though not starved, until the larger request can be completed. When space does become available, requests are considered in the order in which they were made. If there is sufficient space for a given request, then that request is completed and the next request is considered. If there is insufficient space for a given request, then no further requests are considered until sufficient space becomes available for the current request to complete. Preemptive indicates that a send operation can preempt other blocking send operations if space is available. That is, if there is sufficient space for the current request, then that space is used even if there are other requests waiting for space. When space is limited, the Preemptive policy can result in the starvation of larger requests. For example, if there is insufficient available space for a large request, then it is queued up behind other existing requests. When space does become available, all requests are considered in the order in which they were originally made. If there is sufficient space for a given request, then that request is allowed to continue and the next request is considered. If there is insufficient space for a given request, then that request is skipped and the next request is considered. MBean Attribute: JMSServerMBean.BlockingSendPolicy
Production Paused At Startup	Specifies whether production is paused at server startup on destinations targeted to this JMS server. A destination cannot receive any new messages while it is paused. When the value is set to true, then immediately after the host server instance is rebooted, then this JMS server and its targeted destinations are modified such that they are in a "production paused" state, which results in preventing new message production activities on those destinations. To resume normal new message production activity, later you will have to change the state of this JMS server to a "production enabled" state by setting this value to false, and then either redeploy the JMS server or reboot the hosting server instance. When the value is set to default, then the Production Paused At Startup is determined based on the corresponding setting on the individual destination. MBean Attribute: JMSServerMBean.ProductionPausedAtStartup Changes take effect after you redeploy the module or restart the server.
Insertion Paused At Startup	Indicates whether insertion is paused at startup on destinations targeted to this JMS server. A destination cannot receive any new messages while it is paused. When the value is set to true, then immediately after the host server instance is booted, then this JMS server and its targeted destinations are modified such that they are in a "insertion paused" state, which results preventing messages that are result of the "in-flight" work completion to arrive on those destinations. Note: For a detailed definition of "in-flight" work/messages, see weblogic.management.runtime.JMSServerRuntimeMBean#resumeInsertion and weblogic.management.runtime.JMSDestinationRuntime#resumeInsertion To allow in-flight work messages to appear on the destinations, later you will have to change the state of this JMS server to an "insertion enabled" state by setting this value to false, and then either redeploy the JMS server or reboot the hosting server instance. When the value is set to default, then the Insertion Paused At Startup is determined based on the corresponding setting on the individual destination. MBean Attribute: JMSServerMBean.InsertionPausedAtStartup Changes take effect after you redeploy the module or restart the server.
Consumption Paused At Startup	Indicates whether consumption is paused at startup on destinations targeted to this JMS server at startup. A destination cannot receive any new messages while it is paused. When the value is set to true, then immediately after the host server instance is booted, then this JMS server and its targeted destinations are modified such that they are in a "consumption paused" state, which prevents any message consuming activity on those destinations. To allow normal message consumption on the destinations, later you will have to change the state of this JMS server to a "consumption enabled" state by setting this value to false, and then either redeploy the JMS server or reboot the hosting server instance. When the value is set to default, then the Consumption Paused At Startup is determined based on the corresponding setting on the individual destination. MBean Attribute: JMSServerMBean.ConsumptionPausedAtStartup Changes take effect after you redeploy the module or restart the server.