Install Bixolon SRP-S300 Printer

You must have Microsoft .NET Framework 2.0 to install this printer.

Do not define POS printers as Windows printers, they must not be visible in the control panel/printers.

1. Install Microsoft POS for .NET:
   1. Download and install PosForDotNet-1.14.1
   2. Click Next to start the installation.
   3. Accept the terms of the license agreement, and then click Next.
   4. Select your preference for the customer experience improvement program and then click Next.
   5. Confirm the destination folder and then click Next.
   6. Click Install.
   7. Click Finish.
2. Install Bixolon OPOS Driver V5.x:
   1. Connect the printer and ensure that the paper/label roll is inserted.
   2. Download and install BIXOLON_OPOS_Driver_Setup_EN_V5.0.9
   3. Click Next.
   4. Accept the software license agreement and then click Next.
   5. Select Complete and then click Next.
3. Configure devices.
   1. Start the Bixolon OPOS Setup Utility.
   2. Select the printer and then click Modify Device.
   3. Check the settings and confirm that the Logical Device Name (LDN) field shows the Bixolon printer and that the selected interface is set to USB.
   4. Click Check Health.
   5. Click Print to initiate the test print.
   6. Click Exit to return to the previous screen.
   7. Click OK.
   8. Click OK to close the message box.
   9. Click Exit to close the setup application.
   10. The printer now can be used in the Inventory Management bar code printing.