Pre-Configuration Requirements for the Wireless KW270

Before you can connect the KW270 to a wireless network, make sure to:

1. Read the PCI DSS Wireless Guideline Informational Supplement version 2.0.

2. Verify that the KW270 has minimum CAL version 13.1.3.68 installed. If CAL needs to be updated, contact your Oracle MICROS representative.

3. Verify that the USB Wireless Card was installed on the KW270. This must be installed before connecting the KW270 to a wireless network. If you need to request this part, reference the following part number (PN) and description:

   • PIN: MD0018-002 -PT

   • Description: USB Wireless Card

     Note that this card is capable of using WPA2 encryption with AES. Its configuration is PCI compliant when using WPA2 encryption and placed behind a Firewall.

   The Installing the KW270 USB WiFi Option document contains installation instructions.

4. Ensure that your site has a WPA2 compatible Access Point.

5. If using PEAP, have a RADIUS Server (for example, Internet Authentication Service).

6. Have a USB keyboard for the workstation.