Drive Specification

Table 1  Power Requirements

Condition +5VDC (-5%, +10%) +12VDC (-5%, +10%) Startup current peak 0.705A 0.890A Read/Write peak 0.745A 0.965A Read/Write typical (rms) 0.411A 0.751A Maximum power (Max power is measured as the average power in a 1ms interval) 3.35W 10.2W

Table 2  Physical Characteristics

Height (max) Width (max) Depth (max) Weight 0.591 in. 2.75 in. 3.955 in. 4.9 oz 15 mm 69.85 mm 100.45 mm 0.14 kg

Table 3  Usage Information

Usage Description Useful life Minimum 5 years Expected annualized failure rate (AFR) for normal 24/7 operating conditions 0.4335% Operating temperature (Case) 0 to 65 degrees Celsius Note -  Derating of AFR applies above 40 degrees Celsius. Maximum temperature (SMART trip) 70 degrees Celsius (Drive voids warranty above 85 degC) Note -  Drive may be rendered unusable above 85 degrees Celsius. Other environmental factors Conforms to IEC standards

Table 4  Drive Performance

Attribute Value Capacity, formatted 800,166,076,416 bytes (512 bytes per sector) Random 4KB read per sec 440K IOPS Random 4KB write per sec 155K IOPS Sustained sequential read 2200 MB/sec Sustained sequential write 1300 MB/sec Interface data transfer rate 12Gbps/6Gbps/3Gbps/1.5Gbps (auto negotiation, dual port, full duplex) Power-on to ready (no rebuild) < 10 sec Power-on to ready (full rebuild) 30 sec End-to-end T10DIF Type 1 no performance impact

Table 5  SSD Characteristics

Attribute Value NAND geometry Intel Gen1 3D MLC, 32Gbps/die Number of NAND channels 12 NAND Transfer rate per channel 667 MT/sec Rated PE cycles 20,000 Over provisioning 60.00% Page size 16,384 bytes Erase block size 16,777,216 bytes