Go to primary content
Diameter Signaling Router MAP-Diameter Interworking Function
Release 8.2
E89007
Go To Table Of Contents
Contents

Previous
Previous
Next
Next

Diameter Realm Elements

Table 5-2 describes the fields on the MAP-Diameter IWF > Configuration > Diameter Realm page. Data Input Notes apply to Insert and Edit pages; the View page is Read-only.

Table 5-2 Diameter Realm Elements

Field (* indicates a required field) Description Data Input Notes
*Diameter Realm Realm that is specified in the Destination-Realm AVP of a Diameter Request message. This table describes the characteristics of the SS7 network that corresponds to a Diameter Realm. This information is used to translate a Diameter Request message to a MAP Request message that is sent to the SS7 network. Format: text box

Case-insensitive string consisting of a list of labels separated by dots, where a label may contain letters, digits, dashes (-) and underscore (_). A label must start with a letter, digit or underscore and must end with a letter or digit. Underscores may be used only as the first character. A label must be at most 63 characters long and a Realm must be at most 255 characters long.

Range: A valid Realm

Default: N/A

Signaling Network Signaling network (ITUI, ITUN or ANSI) of the SS7 network corresponding to the given Realm. Format: radio buttons

Range: ITUI, ITUN, or ANSI

Default: N/A

MGT (E.214) Conversion Needed Indicates whether the IMSI digits (User-Name AVP) need to be converted to MGT (E.214) format (using table MccMncMapping) when using these digits as the Called Party GTA in the MAP Request message. This is applicable for ITUI and ITUN only. If set to Yes (Checked), this treatment will be applied only if (1) Destination-Host AVP is not present in the Diameter Request message; or (2) fail to map the Destination-Host AVP to a GTA via table DiameterIdentity-GTA. Format: check box

Range = Yes, No, N/A

Default: No (Unchecked) for ITU/ITUN; N/A for ANSI