| Diameter Signaling Router MAP-Diameter Interworking Function Release 8.2 E89007 |
|
 Previous |
 Next |
| Diameter Signaling Router MAP-Diameter Interworking Function Release 8.2 E89007 |
|
|
Previous |
Next |
Table 5-1 describes the fields on the MD-IWF Options page.
Table 5-1 MD-IWF Options Elements
| Field (* indicates a required field) | Description | Data Input Notes |
|---|---|---|
| *Diameter Response Timeout | Timeout value, in seconds, to use when sending a Diameter Request message to the Diameter network (through DM-IWF) and waiting for the Diameter Answer message to arrive. It is suggested that this timer be greater than the Diameter Routing Function's Transaction Lifetime configured under . Note: If the Diameter Pending Answer Timer is less than this value, the Diameter Error Responses from the DSR will be seen. |
Format: text box; numeric Range: 3-30 Default: 15 |
| *MAP Response Timeout | Timeout value, in seconds, to use when sending a MAP Request message to the SS7 network and waiting for the MAP Response message to arrive. This is the time from begin-dialog to close-dialog; it controls how long all of the dialogs within a transaction can continue until the dialog times out. It is suggested that this timer shall be greater than the Segmentation/Reassembly timeout value configured under the SCCP Options folder. | Format: text box; numeric Range: 5-30 Default: 15 |
| EIR Host Name | When translating an incoming MAP-CheckIMEI (EIR) Request message to a Diameter Request message, the Destination-Host AVP will be populated with this FQDN value when the GTA that is derived from the SCCP Called Party Address cannot be mapped to a Diameter Host/Realm using Diameter Identity - GTA entries. If this value is not configured, then an error response is sent back to the SS7 network. | Format: text box FQDN is a case-insensitive string consisting of a list of labels separated by dots, where a label may contain letters, digits, dashes (-) and underscore (_). A label must start with a letter, digit or underscore and must end with a letter or digit. Underscores may be used only as the first character. A label must be at most 63 characters long and a FQDN must be at most 255 characters long. Range: a valid FQDN or empty Default: N/A |
| EIR Realm | When translating an incoming MAP-CheckIMEI (EIR) Request message to a Diameter Request message, the Destination-Realm AVP will be populated with this value when the GTA that is derived from the SCCP Called Party Address cannot be mapped to a Diameter Host/Realm using Diameter Identity - GTA entries. If this value is not configured, then an error response is sent back to the SS7 network. | Format: text box Realm is a case-insensitive string consisting of a list of labels separated by dots, where a label may contain letters, digits, dashes (-) and underscore (_). A label must start with a letter, digit or underscore and must end with a letter or digit. Underscores may be used only as the first character. A label must be at most 63 characters long and a FQDN must be at most 255 characters long. Range: a valid Realm or empty Default: N/A |
| EIR Destination GTA | When translating an incoming ECR (ME-Identity-Check) Diameter Request message to a MAP Request message, if the Destination-Host AVP is absent in the ECR message, then the SCCP Called Party GTA will be populated with this value when the ECR Request Message with no Dest-Host AVP option is configured as Translate Using EIR Dest GTA. | Format: text box; numeric Range: a valid Global Title Address in E.164 format, or empty Default: N/A |
| IWF HSS Destination Host | When translating an incoming (non-EIR) MAP Request message to a Diameter Request message, the Destination-Host AVP will be populated with this FQDN value when the GTA that is derived from the SCCP Called Party Address cannot be mapped to a Diameter Host/Realm using Diameter Identity - GTA entries. If this value is not configured, then MD-IWF will not populate the Destination-Host AVP; it could be resolved on the DSR by FABR or RBAR, or by another upstream Peer. | Format: text box FQDN is a case-insensitive string consisting of a list of labels separated by dots, where a label may contain letters, digits, dashes (-) and underscore (_). A label must start with a letter, digit or underscore and must end with a letter or digit. Underscores may be used only as the first character. A label must be at most 63 characters long and a FQDN must be at most 255 characters long. Range: a valid FQDN or empty Default: N/A |
| IWF HSS Destination Realm | When translating an incoming (non-EIR) MAP Request message to a Diameter Request message, the Destination-Realm AVP will be populated with this value when the GTA that is derived from the SCCP Called Party Address cannot be mapped to a Diameter Host/Realm using Diameter Identity - GTA entries. If this value is not configured, then an error response is sent back to the SS7 network. | Format: text box Realm is a case-insensitive string consisting of a list of labels separated by dots, where a label may contain letters, digits, dashes (-) and underscore (_). A label must start with a letter, digit or underscore and must end with a letter or digit. Underscores may be used only as the first character. A label must be at most 63 characters long and a FQDN must be at most 255 characters long. Range: a valid Realm or empty Default: N/A |
| *Shutdown Mode | Allows the operator to specify the shutdown method used when the Admin State is changed to Disabled. The application can be disabled using either a graceful or forced shutdown method. Graceful allows in-process transactions to continue for a configurable time period before disabling. Forced is an immediate shutdown. | Format: radio buttons Range: Forced or Graceful |
| *Shutdown Timer | Number of seconds that the Shutdown Timer will run during a Graceful shutdown. | Format: text box, numeric Range: 1-30 Default: 15 |
| ECR Request Message with no Destination Host AVP | ||
| Action | When translating an incoming ECR (ME-Identity-Check) Diameter Request message to a MAP Request message, this indicates the action to take if the Destination-Host AVP is absent in the ECR message. If the Destination-Host AVP is present, it is used in the translation to derive the SCCP Called Party GTA.
|
Format: radio buttons Range: Discard, Send Answer, Translate using EIR |
| Response Result Code AVP | If the configured Action is Send Answer, this value is used in the Result-Code or Experimental-Result AVP of the Diameter Answer message | Format: text box, 4-digit numeric; or pulldown list of known Result Codes Range: 1000-5999 |
| Response Vendor ID | If zero, then a Result-Code AVP will be sent when the DSR Application is not Available. If non-zero, then an Experimental-Result AVP will be sent will the Vendor-Id AVP set to this value. Available when Send Answer is selected for the Action. | Format: text box; numeric Range: 0-4294967295 |
| Response Error String | If a non-empty string, this configured string will be appended to the Error-Message AVP that is sent in the Diameter Answer message. Available when Send Answer is selected for the Unavailable Action field. | Format: text box; string of printable ASCII characters. Range 0-64 characters |
| ECR Request Message with Dest-Host present but Not Found in mapping table | ||
| Action | When translating an incoming ECR (ME-Identity-Check) Diameter Request message to a MAP Request message, this indicates the action to take if the Destination-Host AVP is absent in the ECR message. If the Destination-Host AVP is present, it is used in the translation to derive the SCCP Called Party GTA.
|
Format: radio buttons Range: Discard, Send Answer, Translate using EIR |
| Response Result Code AVP | If the configured Action is Send Answer, this value is used in the Result-Code or Experimental-Result AVP of the Diameter Answer message. Available when Send Answer is selected for the associated Action. | Format: text box, 4-digit numeric; or pulldown list of known Result Codes Range: 1000-5999 |
| Response Vendor ID | If zero, then a Result-Code AVP will be sent when the DSR Application is not Available. If non-zero, then an Experimental-Result AVP will be sent with the Vendor-Id AVP set to this value. Available when Send Answer is selected for the Action. | Format: text box; numeric Range: 0-4294967295 |
| Response Error String | If a non-empty string, this configured string will be appended to the Error-Message AVP that is sent in the Diameter Answer message. Available when Send Answer is selected for the Unavailable Action field. | Format: text box; string of printable ASCII characters. Range 0-65 characters |
| Shutdown Mode | Allows the operator to specify the shutdown method used when the Admin State is changed to Disabled. The application can be disabled using either a graceful or forced shutdown method. Graceful allows in-process transactions to continue for a configurable time period before disabling the application. Forced is an immediate shutdown. | Format: radio buttons Range: Forced, Graceful |
| *Shutdown Timer | Unique number of seconds that the Shutdown Timer will run during Graceful shutdown. | Format: text box, numeric Range 1-30 Default: 15 |
| Node GTA | ||
| Viper-place | Global Title Address associated with the Place. When translating incoming Diameter Request messages to MAP Request messages, the SCCP Calling Party GTA is always populated with this value. Configuration is mandatory. The MD-IWF application cannot be enabled if this field is empty. | Format: text box, numeric Range: a valid Global Title Address in E.164 format Default: N/A |
