Upgrade health check using the checkup all option

Use the following procedure to initiate an upgrade health check on a network element basis.

Note:

The target ISO image file must be deployed before initiating a pre-upgrade health check. See Deploying an ISO file for more information. Additionally, a health check cannot be started if another health check is running. For example, a running health check on a server group or any individual servers using the Checkup option.

1. Click Administration > Software Management > Upgrade.
2. Click Checkup All.
3. Select the target Network Elements using the checkboxes presented in the action pane. On the Upgrade [Checkup All] form, all Networks Elements are selected for check up by default. Deselect any Network Elements that do not require a check up or, alternatively, deselect Action and select any Network Elements requiring a health check. Note the server list for all selected Network Elements and confirm all target servers are presented. If any target servers are not presented, then select Cancel and review the server status.
4. Select the appropriate Checkup Type using the options presented in the Health Check Settings pane.
5. Depending on the checkup type, you might be required to select the appropriate ISO image file from the Upgrade ISO list. Table 3-39 lists the choices.

   Table 3-39 ISO image file options

   Option	Description
   Advance Upgrade	(Optional) Select the target ISO image file from the Upgrade ISO list.
   Early Upgrade	(Optional) Select the target ISO image file from the Upgrade ISO list.
   Pre-Upgrade	Select the target ISO image file from the Upgrade ISO list.
   Post-Upgrade	No image selection is required. The ISO list is disabled.

6. Click OK.

The system initiates the health check. The user can monitor the progress of the task by selecting the Tasks list in the page control area. Once the task is complete, the user can access the results file either by selecting the active link under the details column in the Tasks list or clicking Status & Manage > Tasks > Active Tasks, selecting the appropriate server tab, and selecting the active link in the result details column. Either of these methods displays the Files page. See Files for information about managing files.