Routes Insert elements

Table 4-6 describes the elements of the Routes [Insert] form. Elements are displayed for the selected server or server group.

Table 4-6 Routes Insert Elements

Field	Description	Data Input Notes
Route Type	The type of route	Format: Option Range: Net, Default, Host Default: N/A A value is required. Note: The Default route option is available only if there is no default route configured on the target server. There can be no more than one IPv4 and one IPv6 default route defined.
Device	The network device name through which traffic is routed	Format: List Range: Provisioned devices on the selected server Default: N/A A value is required.
Destination	The destination network address Note: This field is disabled if the Route Type is default.	Format: Valid network address Range: Dotted quad decimal (IPv4) or colon hex (IPv6) Default: N/A
Netmask	A valid netmask for the destination network Note: This field is disabled if the Route Type is default. This field is disabled and set to 32 (IPv4) or 128 (IPv6) if the Route Type is host.	Format: Valid netmask Range: Valid netmask for the network in prefix length (IPv4 or IPv6) or dotted decimal (IPv4) format Default: N/A
Gateway IP	The IP Address of the gateway for the route	Format: Valid IP address Range: Dotted quad decimal (IPv4) or colon hex (IPv6) Default: N/A A value is required.