Go to primary content
Diameter Signaling Router SS7/Sigtran
Release 8.2
E89009
Go To Table Of Contents
Contents

Previous
Previous
Next
Next

Executing commands

Use this procedure to execute commands.

  1. Click SS7/Sigtran > Command Line Interface > Command Import
  2. Click Browse to select a file.
  3. Select the file you want to execute from the file browse dialog.
  4. Click Open.
    The file appears in the green Info box at the top of the window.
  5. Select the Execute option and click Submit.
    The file is executed, the file name is displayed in the Info box as a link (for example, MyScript.20100108_185530.txt) to the results file located in the file management area.
  6. Click the link that appears in the Info box to view the Command Execution Results file.
    If the link is clicked immediately after submit, the validation may not be complete, and a partial file may be displayed.

    Note:

    If you navigate away from the SS7/Sigtran > Command Line Interface > Command Import page, the link is no longer available.
    The Command Execution Results file opens.

    An example Command Execution Results file is shown in Command Execution Results.

    The elements in the Command Execution Results file are described in Command Execution Results elements.