Go to primary content
Diameter Signaling Router SS7/Sigtran
Release 8.2
E89009
Go To Table Of Contents
Contents

Previous
Previous
Next
Next

Inserting a Local SCCP User

Use this procedure to insert an LSU.

An LSU cannot be added if an identical LSU already exists with an SSN corresponding to the same LSP (point code and domain).

  1. Click SS7/Sigtran > Configuration > Local SCCP Users.
  2. Click Insert.
  3. Populate the fields with data. For field definitions, see Local SCCP Users elements.
  4. Click OK, Apply, or Cancel.
    If OK or Apply is clicked and any of the following conditions exists, an error message appears:
    • The SSN field contains a value that is a wrong data type or is out of the allowed range
    • Any required field is empty (not entered)
    • An Identical LSU already exists for same SSN corresponding to same LSP (Point code and domain)
    • The LSP no longer exists (has been deleted)
    • Adding this Local SCCP User would cause the maximum number of LSPs per LSU (250) to be exceeded

    The LSU is added to the configuration. By default, the LSU is in the Disabled state. To enable the LSU, see Enabling a Local SCCP User.