Remote Signaling Point elements

Table 3-5 describes the information on the SS7/Sigtran > Configuration > Remote Signaling Points pages: Data Input Notes apply only to the [Insert] page,

Table 3-5 Remote Signaling Points Elements

Element (* indicates required field)	Description	Data Input Notes
*SS7 Domain	The SS7 domain in which the RSP resides.	Format: List Range: ANSI, ITUI - ITU International, ITUN - ITU National, ITU National 24-bit Point Code Note: MD-IWF does not support ITUN24 - ITU National 24-bit point codes.
*MTP Point Code	The unique MTP point code that identifies this RSP. Only one RSP can have this MTP point code.	Text field requires point code format (see Point code formats).
Remote Signaling Point Name	An optional name that uniquely identifies the Remote Signaling Point. RSP names are case sensitive. If this field displays dashes, it indicates that a name has not been configured for this RSP.	Format: Text box; valid characters are alphanumeric and underscore. Must contain at least one alpha and must not start with a digit. Range: A 32-character string.
Adjacent Server Group	The Adjacent Server Group associated with this RSP. Populate this field if this RSP represents an Adjacent Server. An Adjacent Server Group can be referenced by more than one RSP. An RSP, however, can reference one and only one Adjacent Server Group.	Format: List Range: All configured Adjacent Server Groups. Default: None (this RSP is not used to signal to an Adjacent Server).