| Diameter Signaling Router Transport Manager Release 8.2 E89010 |
|
 Previous |
 Next |
Table 4-1 describes the fields on the View and Insert pages. Data Input Notes apply only to the Insert page; the View page is read-only.
Table 4-1 Adjacent Node Elements
| Element (* indicates required field) | Description | Data Input Notes |
|---|---|---|
| * Signaling Network Element Name | Identifies the Signaling Network Element to which the Transport is being added. |
Format: Pulldown list Range: SOAM Signaling Network Element Note: On the SOAM, the Signaling Network Element Name pulldown list is disabled and contains the NE name of the connected SOAM server. |
| * Adjacent Node Name | Unique identifier used to label an Adjacent Node. An Adjacent Node is a remote node that serves as the far end of a Transport. |
Format: Valid characters are alphanumeric and underscore (_). Must contain at least one alpha and must not start with a digit. Range: A 32-character string |
| * IP Address 1 | Primary IP address of an Adjacent Node. |
Format: IPv4 P address xxx.xxx.xxx.xxx Range: A valid IPv4 address |
| IP Address 2 | IP address 2 of an Adjacent Node. If this is configured, then the Transport for which this Adjacent Node hosts the remote end can be configured as Multihomed if both the IP Addresses are selected in Transport Configuration. |
Format: IPv4 P address xxx.xxx.xxx.xxx Range: A valid IPv4 address |
