Adding a SimVen Interface

  1. Access the Interfaces module:
    • If you are using Simphony First Edition, from the EMC select the Enterprise, and then click Interfaces.

    • If you are using Simphony, from the EMC select the Enterprise, click Setup, and then click Interfaces.

  2. Insert a new interface named SimVen, and then double-click the record to open it.
  3. On the General tab, enter SimVen for the Communication Type, select 0 - PMS/SIM as the Interface Type, and then select 1 - TCP as the Communication Type.
  4. On the Options tab, enter the TCP Host Name and Port Number of the server where the TangenWinService is running, and then select the following options:
    • 3 - Allow Inquiry without Sign-In

    • 4 - Use 5 Digits for Number of Guests

    • 5 - On = Use 9 digits for Terminal IDs; Off = Use 2 digits for Terminal IDs

  5. On the Properties tab, select the properties that use the SimVen interface.
  6. On the Service Host tab, select the Service Host from which TCP communications to the TangenWinService.
  7. Click Save.