Go to primary content
Oracle® Communications Alarms and KPIs
Release 8.3
E93200
Go To Table Of Contents
Contents

Previous
Previous
Next
Next

22052 - Peer Degraded

Alarm Group:
DIAM
Description:
The peer has some available connections, but less than its minimum connection capacity. Continued routing to this peer may cause congestion or other overload conditions.
Severity:
Major
Instance:
<PeerName> (of the Peer which is degraded)
HA Score:
Normal
Auto Clear Seconds:
0 (zero)
OID:
eagleXgDiameterPeerDegradedNotify
Cause:
  • If the number of available connections to peer node is less than minimum connection capacity which is default 1 per Peer Node, configured in Main Menu > Diameter > Configuration > Peer Node, then Peer Node Status will be degraded, and alarm 22052 raises.
  • If all the connections are degraded for the peer node, then Peer Node status will be degraded and Alarm 22052 raises.
Diagnostic Information:
  • Verify the number of available connection to that peer should be greater than minimum connection capacity which is default 1.
  • DSR configurations on active SO
  • Savelogs on active SO
  • Event History on active SO

Recovery:

  1. Peer status can be monitored from Diameter > Maintenance > Peer Nodes.
  2. Verify IP network connectivity exists between the MP server and the adjacent servers.
  3. Check the event history logs for additional DIAM events or alarms from this MP server.
  4. Verify the peer is not under maintenance.
  5. Make sure the number of available connections to that peer node is greater than minimum connection capacity configure from Diameter > Maintenance > Peer Nodes.
  6. If the problem persists, it is recommended to contact My Oracle Support.