The message was discarded due to a routing error.
The NI (Network Indicator) value received in a message from the network is not
assigned to the MP. This event is generated under the following circumstances:
The NI in the MTP3 routing label of the ingress
message is not supported for the given network signaling domain for a
provisioned Local Signaling Point.
For an ingress ANSI SCCP message, Bit-8 in the
SCCP CDPA address indicator octet indicates that the CDPA is encoded as per
international specifications:
A "0" in Bit 8 indicates that the address
is international and that both the address indicator and the address are coded
according to international specifications.
A "1" in Bit 8 indicates that the address
is national and that both the address indicator and the address are coded
according to national specifications.
The NI cannot be International for ANSI
messages, since the ordering of the subsystem number indicator field and the
point code indicator fields are in the reverse order in the ITU specification.
Severity:
Info
Instance:
N/A
HA Score:
Normal
Throttle Seconds:
10
OID:
awpss7M3rlRoutingFailureInvalidNiNotify
Recovery:
The Signaling Transfer Point or
Signaling Gateway routing tables may be inconsistent with the NI assigned to the MP.
You can monitor each MP's assigned NI value from
SS7/Sigtran > Configuration > Remote
Signaling Points.
If the problem persists, it is recommended to
contact My Oracle Support.