E3111 Cmd Rej: Loading mode unstable. System’s LIM service is unavailable

Less than 80% of the system’s LIM cards and the minimum number of VSCCP or SCCP cards required to support 80% of the LIM cards are not in service or are inhibited (OOS-MT-DSBLD).

Note:

Loading mode support denies the execution of LNP database change commands when the system is in an unstable loading mode. An unstable loading mode will result in all STP or LNP database update commands being rejected.

Recovery

1. Display the state of the signaling links in the database. Enter the rept-stat-slk command.
   The state of the signaling links must be in-service normal (IS-NR) or out-of-service maintenance-disabled (OOS-MT-DSBLD) The status is shown in the PST field.
2. Display the state of the VSCCP, SCCP, and LIM cards in the database. Enter the rept-stat-card command.
   The state of the cards must be IS-NR or OOS-MT-DSBLD. This is shown in the PST field.
3. Change the state of the signaling links and cards as necessary. Refer to the Maintenance Guide for assistance.
4. Re-enter the command that generated this error message.
   Contact My Oracle Support if this error message appears again. See My Oracle Support (MOS).