E4403 Cmd Rej: CGSSN cannot be specified with OPTSN/OPCSN/CGSELID

For the chg-gta command, the FLOBR feature must be turned on before the cgssn, opcsn, optsn, and cgselid parameters can be specified in the same command.

For the ent-gta command, if the cgssn parameter is specified, then the optsn and cgselid parameters cannot be specified.

Recovery - ent-gta

Re-enter the ent-gta command that generated this error message, specifying a valid combination of parameters. Refer to the command description in Commands User's Guide and to the Database Administration - GTT User's Guide for assistance.

Recovery - chg-gta

1. Display the status of the FLOBR feature. Enter the rtrv-ctrl-feat comnand.
   If the feature does not appear in the output, then the feature is not enabled. If the feature has a status of OFF, then the feature is enabled but is not turned on.
2. Enable and turn on the feature as necessary. Refer to the Database Administration - GTT User's Guide for assistance.
3. Re-enter the chg-gta command that generated this error message, specifying a valid combination of parameters. Refer to the command description in Commands User's Guide for assistance.