Verify IPLIMx configuration

1. Is there an IPLIMx application in the system?

   rtrv-card

2. Is the IP-LNK table data filled properly? Duplex? 10 or 100 Mbps? Auto=no? IP address Correct? Subnet Mask Correct?
3. Is the IP-CARD table correct? Def router?
4. Is the IP-HOST table data filled? Local hosts specified? Remote hosts specified?
5. Are the Signaling Links built?

   rtrv-card:loc=<IP Card location>

   rtrv-slk:loc=<ip card location>:port=<SS7 port>

6. Is the IPLIMx linkset built?

   pass:loc=<IP card location>:cmd="assocrtt <association>"

7. Is the adjacent point code built in the destination and route table?

   rtrv-dstn:dpc=<far end point code>

   rtrv-rte:dpc=<far end point code>

8. Are there associations using the IPLIMx application?
   rtrv-assoc:display=all
9. What is the status of the associations?

   rept-stat-assoc

10. What is the status of the linkset?

    rept-stat-ls:lsn=<IPLIM linkset>

11. What is the status of the SLKs?

    rept-stat-slk:loc=<ip card location>:port=<SS7 port>

12. What is the status of the adjacent point code?

    rept-stat-rte:mode=full:dpc=<adjacent point code>