Oracle® Communications EAGLE Database Administration - SS7 User's Guide Release 46.6 E93318 Revision 1 |
|
![]() Previous |
![]() Next |
This procedure is used to remove a
linkset containing
SS7
signaling links from the database using the
dlt-ls
command.
The
dlt-ls
command has only one
parameter,
lsn
, which is the name of the
linkset to be removed from the database.
The linkset to be removed must exist in the database.
To remove a linkset, all links associated with the linkset must be removed.
The linkset to be removed cannot be referenced by a routeset.
If the Flexible Linkset Optional Based Routing feature is enabled and turned on, and the linkset is referenced by a GTT selector, the linkset cannot be removed.
To remove an IPGWx linkset, a linkset containing signaling links assigned to cards running either the SS7IPGW or IPGWI applications, the IPGWx linkset cannot be the mate of another IPGWx linkset.
A proxy linkset whose APC is assigned
to more than one proxy linkset cannot be removed if the linkset contains the
proxy point code (shown in the
PPCA/PPCI/PPCN/PPCN24
field in the
rtrv-ls:apc/apca/apci/apcn/apcn24=<APC of the
linkset>
output) that is also assigned to the APC of the linkset.
The proxy point code assigned to the APC of the linkset is shown in the
rtrv-dstn:dpc/dpca/dpci/dpcn/dpcn24=<APC of
the linkset>
output. The linksets that do not contain the proxy
point code that is assigned to the APC of the linkset must be removed before
the linkset containing proxy point code that is assigned to the APC of the
linkset can be removed.
Canceling the
RTRV-LS
Command
Because the
rtrv-ls
command used in this
procedure can output information for a long period of time, the
rtrv-ls
command can be canceled
and the output to the terminal stopped. There are three ways that the
rtrv-ls
command can be
canceled.
F9
function key on the keyboard
at the terminal where the
rtrv-ls
command was entered.
canc-cmd
without the
trm
parameter at the terminal
where the
rtrv-ls
command was entered.
canc-cmd:trm=<xx>
, where
<xx>
is the terminal
where the
rtrv-ls
command was entered,
from another terminal other that the terminal where the
rtrv-ls
command was entered. To
enter the
canc-cmd:trm=<xx>
command, the terminal must allow Security Administration commands to be entered
from it and the user must be allowed to enter Security Administration commands.
The terminal’s permissions can be verified with the
rtrv-secu-trm
command. The
user’s permissions can be verified with the
rtrv-user
or
rtrv-secu-user
commands.
For more information about the
canc-cmd
command, go to
Commands User's Guide.
rtrv-ls
command. This is an
example of the possible output.
rlghncxa03w 07-05-10 11:43:04 GMT EAGLE5 37.0.0 L3T SLT GWS GWS GWS LSN APCA (SS7) SCRN SET SET BEI LST LNKS ACT MES DIS SLSCI NIS e1e2 001-207-000 none 1 1 no B 6 off off off no off ls1 240-012-004 scr1 1 1 yes a 4 off off off yes off ls1305 000-005-000 none 1 1 no A 1 off off off no off ls1307 000-007-000 none 1 1 no A 1 off off off no off e1m1s1 001-001-001 none 1 1 no A 7 off off off no off e1m1s2 001-001-002 none 1 1 no A 7 off off off no off lsgw1103 003-002-004 none 1 1 no A 1 off off off no off lsn150 150-001-002 none 1 1 no PRX 1 off off off no off lsn151 150-001-002 none 1 1 no PRX 1 off off off no off L3T SLT GWS GWS GWS LSN APCI (SS7) SCRN SET SET BEI LST LNKS ACT MES DIS SLSCI NIS e1e2i 1-207-0 none 1 1 no B 4 off off off --- on ls1315 0-015-0 none 1 1 no A 1 off off off --- off ls1317 0-017-0 none 1 1 no A 1 off off off --- on e1m2s1 1-011-1 none 1 1 no A 7 off off off --- off e1m2s2 1-011-2 none 1 1 no A 7 off off off --- off Link set table is (14 of 1024) 1% full.
If the linkset being removed is a proxy linkset
(LST=PRX
), and more than one linkset is shown
in the
rtrv-ls
output that contains the
APC of the linkset being removed, continue the procedure with
2.
If the linkset being removed is not a proxy linkset, or is a proxy linkset whose APC is not used by more than one linkset, continue the procedure with 4.
rtrv-ls
command with the APC of the
linkset. For this example, enter this command.
rtrv-ls:apca=150-001-002
This is an example of the possible output.
rlghncxa03w 07-08-23 11:09:57 EST 37.0.0 APCA = 150-001-002 L3T SLT GWS GWS GWS LSN PPCA SCRN SET SET BEI LST LNKS ACT MES DIS SLSCI NIS lsn150 150-001-001 none 1 1 no PRX 1 off off off no off lsn151 150-001-004 none 1 1 no PRX 1 off off off no off Link set table is (14 of 1024) 1% full.
rtrv-dstn
command with the APC of
the linkset. For this example, enter this command.
rtrv-dstn:dpca=150-001-002
This is an example of the possible output.
Oraclestp 10-12-15 09:22:39 EST 43.0.0 DPCA CLLI BEI ELEI ALIASI ALIASN/N24 DMN 150-001-002 ----------- no --- ---------- -------------- SS7 PPCA NCAI PRX RCAUSE NPRST SPLITIAM HMSMSC HMSCP SCCPMSGCNV 150-001-001 ---- no none off none no no none Destination table is (14 of 2000) 1% full Alias table is (0 of 12000) 0% full PPC table is (2 of 10) 20% full
A proxy linkset whose APC is assigned to more than
one proxy linkset cannot be removed if the linkset contains the proxy point
code (shown in the
PPCA/PPCI/PPCN/PPCN24
field in
2)
that is also assigned to the APC of the linkset (shown in
3).
The linksets that do not contain the proxy point code that is assigned to the
APC of the linkset must be removed before the linkset containing proxy point
code that is assigned to the APC of the linkset can be removed.
rtrv-ls
command, specifying the
linkset name of the linkset you wish to remove from the database. For this
example, enter these commands.
rtrv-ls:lsn=ls1
This is an example of the possible output.
tekelecstp 18-01-22 05:31:51 EST EAGLE 46.6.0.0.0-71.21.0 L3T SLT GWS GWS GWS LSN APCA (SS7) SCRN SET SET BEI LST LNKS ACT MES DIS SLSCI NIS ls1 003-003-003 gws1 1 1 no A 15 on on on yes off SPCA CLLI TFATCABMLQ MTPRSE ASL8 ---------------- ----------- 7 no no RANDSLS off IPSG GTTMODE CGGTMOD no CdPA no LP ATM LOC LINK SLC TYPE SET BPS TSEL VCI VPI LL 1102 A 2 LIMATM 1 1.544M EXTERNAL 5 0 0 LOC LINK SLC TYPE IPLIML2 1201 A 5 IPLIM M2PA L2T PCR PCR E1 E1 LOC LINK SLC TYPE SET BPS ECM N1 N2 LOC PORT TS 1205 A 6 LIME1 1 56000 BASIC --- ----- 1205 1 1 L2T PCR PCR T1 T1 LOC LINK SLC TYPE SET BPS ECM N1 N2 LOC PORT TS 1206 A 10 LIMT1 1 56000 BASIC --- ----- 1206 1 1 Link set table is (7 of 1024) 1% full.
rtrv-ls:lsn=lsgw1103
This is an example of the possible output.
rlghncxa03w 07-05-17 11:43:04 GMT EAGLE5 37.0.0 L3T SLT GWS GWS GWS LSN APCA (SS7) SCRN SET SET BEI LST LNKS ACT MES DIS SLSCI NIS lsgw1103 003-002-004 none 1 1 no A 1 off off off no off SPCA CLLI TFATCABMLQ MTPRSE ASL8 ---------------- ----------- 1 no no IPGWAPC MATELSN IPTPS LSUSEALM SLKUSEALM GTTMODE yes --------- 10000 70 % 70 % CdPA LOC LINK SLC TYPE 1103 A 0 SS7IPGW Link set table is ( 14 of 1024) 1% full
rtrv-ls:lsn=lsn151
This is an example of the possible output.
rlghncxa03w 09-07-23 13:10:34 EST 41.1.0 L3T SLT GWS GWS GWS LSN APCA (SS7) SCRN SET SET BEI LST LNKS ACT MES DIS SLSCI NIS lsn151 150-001-002 none 1 1 no PRX 1 off off off no off PPCA CLLI TFATCABMLQ MTPRSE ASL8 150-001-004 ----------- 1 no no IPGWAPC MATELSN IPTPS LSUSEALM SLKUSEALM GTTMODE no ---------- ---- --- --- CdPA L2T PCR PCR LOC LINK SLC TYPE SET BPS ECM N1 N2 2105 A 0 LIMDS0 1 56000 BASIC --- --- Link set table is (14 of 1024) 1% full.
rtrv-rte
command, specifying
the name of the linkset you wish to remove. For this example, enter these
commands.
rtrv-rte:lsn=ls1
This is an example of the possible output.
rlghncxa03w 07-05-10 11:43:04 GMT EAGLE5 37.0.0 LSN DPC RC ls1 240-012-004 10
rtrv-rte:lsn=lsgw1103
This is an example of the possible output.
rlghncxa03w 07-05-10 11:43:04 GMT EAGLE5 37.0.0 LSN DPC RC lsgw1103 003-002-004 10
rtrv-rte:lsn=lsn151
This is an example of the possible output.
rlghncxa03w 07-05-10 11:43:04 GMT EAGLE5 37.0.0 LSN DPC RC lsn151 150-001-002 10
If any routes reference the linkset to be removed, remove these routes by performing the Removing a Route procedure.
dact-slk
command. For this
example, enter these commands.
dact-slk:loc=1205:link=b
dact-slk:loc=1207:link=b
dact-slk:loc=1211:link=a
dact-slk:loc=1213:link=b
dact-slk:loc=1103:link=a
dact-slk:loc=2105:link=a
When each of these commands have successfully completed, this message should appear.
rlghncxa03w 07-05-07 08:41:12 GMT EAGLE5 37.0.0 Deactivate Link message sent to card
rept-stat-ls
command,
specifying the linkset name. For this example, enter these commands.
rept-stat-ls:lsn=ls1
This is an example of the possible output.
rlghncxa03w 07-05-23 13:35:08 GMT EAGLE5 37.0.0 LSN APCA PST SST AST ls1 240-012-004 OOS-MT-DSBLD Prohibit ----- SPCA = ---------------- ALARM STATUS = No Alarms SCRSET = scr1 GWSA = ---- GWSM = ---- GWSD = ---- SLC SLK SST SLC SLK SST 0 1205,B Unavail 8 ----,- UEQ 1 1213,B Unavail 9 ----,- UEQ 2 1211,A Unavail 10 ----,- UEQ 3 1207,B Unavail 11 ----,- UEQ 4 ----,- UEQ 12 ----,- UEQ 5 ----,- UEQ 13 ----,- UEQ 6 ----,- UEQ 14 ----,- UEQ 7 ----,- UEQ 15 ----,- UEQ Command Completed.
rept-stat-ls:lsn=lsgw1103
This is an example of the possible output.
rlghncxa03w 07-05-23 13:35:08 GMT EAGLE5 37.0.0 LSN APCA PST SST AST lsgw1103 003-002-004 OOS-MT-DSBLD Prohibit ----- SPCA = ---------------- ALARM STATUS = No Alarms SCRSET = scr1 GWSA = ---- GWSM = ---- GWSD = ---- SLC SLK SST SLC SLK SST 0 1103,A Unavail 8 ----,- UEQ 1 ----,- UEQ 9 ----,- UEQ 2 ----,- UEQ 10 ----,- UEQ 3 ----,- UEQ 11 ----,- UEQ 4 ----,- UEQ 12 ----,- UEQ 5 ----,- UEQ 13 ----,- UEQ 6 ----,- UEQ 14 ----,- UEQ 7 ----,- UEQ 15 ----,- UEQ Command Completed.
rept-stat-ls:lsn=lsn151
This is an example of the possible output.
rlghncxa03w 07-05-23 13:35:08 GMT EAGLE5 37.0.0 LSN APCA PST SST AST lsn151 150-001-002 OOS-MT-DSBLD Prohibit ----- PPCA = 150-001-004 ALARM STATUS = No Alarms SCRSET = ---- GWSA = ---- GWSM = ---- GWSD = ---- SLC SLK SST SLC SLK SST 0 2105,A Unavail 8 ----,- UEQ 1 ----,- UEQ 9 ----,- UEQ 2 ----,- UEQ 10 ----,- UEQ 3 ----,- UEQ 11 ----,- UEQ 4 ----,- UEQ 12 ----,- UEQ 5 ----,- UEQ 13 ----,- UEQ 6 ----,- UEQ 14 ----,- UEQ 7 ----,- UEQ 15 ----,- UEQ Command Completed.
rtrv-slk
command and specifying
each of the card locations shown in the output of
4.
Do not specify the
link
parameter. For this
example, enter these commands.
rtrv-slk:loc=1205
This is an example of the possible output.
rlghncxa03w 09-07-19 21:17:04 GMT EAGLE5 41.1.0 L2T PCR PCR LOC LINK LSN SLC TYPE SET BPS ECM N1 N2 1205 B ls1 0 LIMDS0 1 56000 BASIC --- -----
rtrv-slk:loc=1207
This is an example of the possible output.
rlghncxa03w 09-07-19 21:17:04 GMT EAGLE5 41.1.0 L2T PCR PCR LOC LINK LSN SLC TYPE SET BPS ECM N1 N2 1207 A ls3 1 LIMDS0 1 56000 BASIC --- ----- 1207 B ls1 3 LIMDS0 1 56000 BASIC --- -----
rtrv-slk:loc=1211
This is an example of the possible output.
rlghncxa03w 09-07-17 11:43:04 GMT EAGLE5 41.1.0 L2T PCR PCR LOC LINK LSN SLC TYPE SET BPS ECM N1 N2 1211 A ls1 2 LIMDS0 1 56000 BASIC --- ----- 1211 B ls2 0 LIMDS0 1 56000 BASIC --- -----
rtrv-slk:loc=1213
This is an example of the possible output.
rlghncxa03w 09-07-19 21:17:04 GMT EAGLE5 41.1.0 L2T PCR PCR LOC LINK LSN SLC TYPE SET BPS ECM N1 N2 1213 A ls2 1 LIMDS0 1 56000 BASIC --- ----- 1213 B ls1 1 LIMDS0 1 56000 BASIC --- -----
rtrv-slk:loc=1103
This is an example of the possible output.
rlghncxa03w 07-05-19 21:17:04 GMT EAGLE5 37.0.0 LOC LINK LSN SLC TYPE 1103 A lsn1 0 SS7IPGW
rtrv-slk:loc=2105
This is an example of the possible output.
rlghncxa03w 09-07-19 21:17:04 GMT EAGLE5 41.1.0 L2T PCR PCR LOC LINK LSN SLC TYPE SET BPS ECM N1 N2 2105 A lsn151 0 LIMDS0 1 56000 BASIC --- ---
rmv-card
command, specifying
the card location to be taken out of service. For this example, enter these
commands.
rmv-card:loc=1205
When this command has successfully completed, this message should appear.
rlghncxa03w 07-05-07 11:11:28 GMT EAGLE5 37.0.0 Card has been inhibited.
rmv-card:loc=1103
When this command has successfully completed, this message should appear.
rlghncxa03w 07-05-07 11:11:28 GMT EAGLE5 37.0.0 Card has been inhibited.
rmv-card:loc=2105
When this command has successfully completed, this message should appear.
rlghncxa03w 07-05-07 11:11:28 GMT EAGLE5 37.0.0 Card has been inhibited.
dlt-slk
command. For this
example, enter these commands.
dlt-slk:loc=1205:link=b
dlt-slk:loc=1207:link=b
dlt-slk:loc=1211:link=a
dlt-slk:loc=1213:link=b
dlt-slk:loc=1103:link=a
dlt-slk:loc=2105:link=a
When each of these commands have successfully completed, this message should appear.
rlghncxa03w 07-05-07 08:41:17 GMT EAGLE5 37.0.0 DLT-SLK: MASP A - COMPLTD
Note:
If the signaling links removed in this step were not assigned to either the SS7IPGW or IPGWI applications, continue the procedure with 14.rept-stat-iptps
command.
This is an example of the possible output.
rlghncxa03w 10-07-19 21:16:37 GMT EAGLE5 42.0.0 IP TPS USAGE REPORT THRESH CONFIG/ CONFIG/ TPS PEAK PEAKTIMESTAMP RSVD MAX -------------------------------------------------------------------------- LSN lsgw1101 80% ---- 10000 TX: 7200 7600 04-06-10 11:40:04 RCV: 7200 7600 04-06-10 11:40:04 lsgw1103 80% ---- 10000 TX: 6700 7600 04-06-10 11:40:04 RCV: 6500 7600 04-06-10 11:40:04 lsgw1105 80% ---- 10000 TX: 7300 7450 04-06-10 11:40:04 RCV: 7300 7450 04-06-10 11:40:04 -------------------------------------------------------------------------- Command Completed.
rtrv-ls
command with one of the
linkset names shown in
11.
This is to verify if the linkset being removed in this procedure is a mate to
another IPGWx linkset.
Repeat this step until all the linksets in 11 have been displayed, or a linkset is found that has the linkset being removed as a mate. For this example, enter this command.
rtrv-ls:lsn=lsgw1105
This is an example of the possible output.
rlghncxa03w 07-05-17 11:43:04 GMT EAGLE5 37.0.0 L3T SLT GWS GWS GWS LSN APCA (SS7) SCRN SET SET BEI LST LNKS ACT MES DIS SLSCI NIS lsgw1105 009-002-003 none 1 1 no A 1 off off off no off CLLI TFATCABMLQ MTPRSE ASL8 ----------- 1 no no IPGWAPC MATELSN IPTPS LSUSEALM SLKUSEALM GTTMODE yes lsgw1103 10000 70 % 70 % CdPA LOC LINK SLC TYPE 1105 A 0 SS7IPGW Link set table is ( 14 of 1024) 1% full
Note:
If thertrv-ls
output in this step
shows that the linkset being removed is not the mate of another IPGWx linkset,
continue the procedure with
14.
rtrv-rtx
command with the
lsn
parameter. For this
example, enter this command.
Remove all the entries displayed in this step by performing the Removing a Route Exception Entry procedure.
rtrv-rtx:lsn=ls1
This is an example of the possible output.
rlghncxa03w 07-05-10 11:43:04 GMT EAGLE5 37.0.0 DPCA RTX-CRITERIA LSN RC APC 240-012-006 OPCA 008-008-008 ls1 40 240-012-004 DESTINATION ENTRIES ALLOCATED: 2000 FULL DPC(s): 15 EXCEPTION DPC(s): 5 NETWORK DPC(s): 0 CLUSTER DPC(s): 1 TOTAL DPC(s): 21 CAPACITY (% FULL): 1% ALIASES ALLOCATED: 12000 ALIASES USED: 0 CAPACITY (% FULL): 0% X-LIST ENTRIES ALLOCATED: 500
rtrv-rtx:lsn=lsgw1103
This is an example of the possible output.
rlghncxa03w 07-05-10 11:43:04 GMT EAGLE5 37.0.0 DESTINATION ENTRIES ALLOCATED: 2000 FULL DPC(s): 15 EXCEPTION DPC(s): 5 NETWORK DPC(s): 0 CLUSTER DPC(s): 1 TOTAL DPC(s): 21 CAPACITY (% FULL): 1% ALIASES ALLOCATED: 12000 ALIASES USED: 0 CAPACITY (% FULL): 0% X-LIST ENTRIES ALLOCATED: 500
rtrv-rtx:lsn=lsn151
This is an example of the possible output.
rlghncxa03w 07-05-10 11:43:04 GMT EAGLE5 37.0.0 DESTINATION ENTRIES ALLOCATED: 2000 FULL DPC(s): 15 EXCEPTION DPC(s): 5 NETWORK DPC(s): 0 CLUSTER DPC(s): 1 TOTAL DPC(s): 21 CAPACITY (% FULL): 1% ALIASES ALLOCATED: 12000 ALIASES USED: 0 CAPACITY (% FULL): 0% X-LIST ENTRIES ALLOCATED: 500
If the linkset being removed in this procedure is
not assigned to a route exception table entry, no entries are displayed in the
rtrv-rtx
output, but a summary
of the point code quanties is displayed.
If the name of the linkset being removed in this
procedure shown in the
LSN
column in this step,
perform one of these procedures:
If the linkset contains the entries
fcd
,
fcg
,
fcdfcg
, or
fcgfcd
in the
GTTMODE
column of the
rtrv-ls
output in
4,
the Flexible Linkset Optional Based Routing feature is enabled and turned on.
Continue the procedure with
17.
If the linkset does not contain the entries
fcd
,
fcg
,
fcdfcg
, or
fcgfcd
in the
GTTMODE
column of the
rtrv-ls
output in
4,
continue the procedure with
16.
rtrv-ctrl-feat:partnum=893027701
This is an example of the possible output.
rlghncxa03w 09-05-10 11:43:04 GMT EAGLE5 41.0.0 The following features have been permanently enabled: Feature Name Partnum Status Quantity Flex Lset Optnl Based Rtg 893027701 on ---- The following features have been temporarily enabled: Feature Name Partnum Status Quantity Trial Period Left Zero entries found. The following features have expired temporary keys: Feature Name Partnum Zero entries found.
If the Flexible Linkset Optional Based Routing feature is enabled and turned on, continue the procedure with 17.
If the Flexible Linkset Optional Based Routing feature is not enabled or not turned on, continue the procedure with 18.
rtrv-gttsel
command with the name of
the linkset. For this example, enter these commands.
rtrv-gttsel:lsn=ls1
This is an example of the possible output.
rlghncxa03w 09-05-10 11:43:04 GMT EAGLE5 41.0.0 GTI CG CDPA CGPA ANSI TT NP NAI SSN SELID LSN GTTSET GTTSET 2 180 -- --- any none ls1 ----- (--- ) cdgta4 (cdgta) GTI CG CDPA CGPA INTL TT NP NAI SSN SELID LSN GTTSET GTTSET GTI CG CDPA CGPA NATL TT NP NAI SSN SELID LSN GTTSET GTTSET GTI CG CDPA CGPA N24 TT NP NAI SSN SELID LSN GTTSET GTTSET
rtrv-gttsel:lsn=lsgw1103
This is an example of the possible output.
rlghncxa03w 09-05-10 11:43:04 GMT EAGLE5 41.0.0 GTI CG CDPA CGPA ANSI TT NP NAI SSN SELID LSN GTTSET GTTSET 2 170 -- --- any none lsgw1103 ----- (--- ) cdgta4 (cdgta) GTI CG CDPA CGPA INTL TT NP NAI SSN SELID LSN GTTSET GTTSET GTI CG CDPA CGPA NATL TT NP NAI SSN SELID LSN GTTSET GTTSET GTI CG CDPA CGPA N24 TT NP NAI SSN SELID LSN GTTSET GTTSET
rtrv-gttsel:lsn=lsn151
This is an example of the possible output.
rlghncxa03w 09-05-10 11:43:04 GMT EAGLE5 41.0.0 GTI CG CDPA CGPA ANSI TT NP NAI SSN SELID LSN GTTSET GTTSET 2 160 -- --- any none lsn151 ----- (--- ) cdgta4 (cdgta) GTI CG CDPA CGPA INTL TT NP NAI SSN SELID LSN GTTSET GTTSET GTI CG CDPA CGPA NATL TT NP NAI SSN SELID LSN GTTSET GTTSET GTI CG CDPA CGPA N24 TT NP NAI SSN SELID LSN GTTSET GTTSET
If GTT selectors are shown in the
rtrv-gttsel
output, perform the
"Removing a GTT Selector" procedure in
Database Administration - GTT User's
Guide to remove all entries shown in this step. After the GTT selectors
have been removed, continue the procedure with
18.
If GTT selectors are not shown in the
rtrv-gttsel
output, continue the
procedure with
18.
dlt-ls
command. For this
example, enter these commands.
dlt-ls:lsn=ls1
dlt-ls:lsn=lsgw1103
dlt-ls:lsn=lsn151
When each of these commands have successfully completed, this message should appear.
rlghncxa03w 07-05-17 16:03:12 GMT EAGLE5 37.0.0 Link set table is ( 23 of 1024) 2% full DLT-LS: MASP A - COMPLTD
rtrv-ls
command with the
linkset name used in
18.
For this example, enter these commands.
rtrv-ls:lsn=lsn1
rtrv-ls:lsn=lsgw1103
rtrv-ls:lsn=lsn151
If the removal of the linkset was successful, the following message is displayed.
rlghncxa03w 09-07-10 11:43:04 GMT EAGLE5 41.1.0 No matching entry found. Link set table is (11 of 1024) 1% full.
Continue the procedure with 20 if the linkset that was removed in has any of these attributes.
If you wish to remove the proxy linkset that contains the proxy point code that is also assigned to the APC of the linkset, and the database contains other linksets that are assigned to this APC, these other linksets must be removed before the proxy linkset that contains the proxy point code that is also assigned to the APC of the linkset can be removed. Repeat this procedure from 2 to remove these linksets. After these linksets have been removed, perform this procedure again from 2 to remove the proxy linkset that contains the proxy point code that is also assigned to the APC of the linkset.
chg-db:action=backup:dest=fixed
command. These messages should appear, the active
Maintenance
and Administration Subsystem Processor (MASP) appears first.
BACKUP (FIXED) : MASP A - Backup starts on active MASP. BACKUP (FIXED) : MASP A - Backup on active MASP to fixed disk complete. BACKUP (FIXED) : MASP A - Backup starts on standby MASP. BACKUP (FIXED) : MASP A - Backup on standby MASP to fixed disk complete.
Figure 3-11 Removing a Linkset Containing SS7 Signaling Links
Sheet 1 of 7
Sheet 2 of 7
Sheet 3 of 7
Sheet 4 of 7
Sheet 5 of 7
Sheet 6 of 7
Sheet 7 of 7