SM8G-B 32-bit to 64-bit Conversion

The following procedure is used to convert the 32-bit mode to 64-bit. The target card must already be running on the BLMCAP GPL and had its bootloader swapped, as completed in SM8G-B Bootloader Swap. Skip this procedure if the card is already running the BLDC64 GPL.

1. Inhibit the target card with the inh-card:loc=<card_loc>:force=yes.
   The card will boot and return to state OOS-MT-DSBLD within 60 seconds.
2. Flash the card with the init-flash:loc=<card_loc>:code=appr:mode=cnvrtbit:bits=64 command.
   After the flashing operations complete, the card will boot and return to state OOS-MT-DSBLD.
3. Activate the new BLDC64 GPL with the act-flash:loc=<card_loc> command.
   The card will now run on 64-bit mode and will accept 64-bit mode applications from the OAM.