0155 - STPLAN Connection Unavailable

This message indicates that the TCP/IP connection to the remote host is lost. The physical connection may be faulty or the remote host is not accepting a TCP/IP connection.

Example

RLGHNCXA21W 00-12-07 12:01:43 EST  EAGLE 35.0.0
* 0014.0155  * DLK 1104,A STPLAN     STPLAN connection unavailable

Alarm Level: Minor

Recovery

1. Determine if the reported card is out of service using the rept-stat-card command.
   If card is not OOS-MT, proceed to 3.
2. If card is OOS-MT, do the following, using the rept-stat-card command to check for card IS-NR state after each action:
   1. Reinitialize card using the init-card command.
   2. Reseat the card.
   3. Replace the card.
      Refer to the Maintenance Manual for card removal/replacement procedures.
3. Use the rtrv-ip-node command to identify the address and node of the remote host.
4. Use the tst-dlk command to test the TCP/IP connection.
5. If the tst-dlk test passes, check that the proper port designation is set at the remote host.
6. If tst-dlk fails, perform the following checks:
   1. Check the remote host hardware and software.
   2. Use your company procedures to check the network.
   3. Check cable connections at the system and at the remote host.
7. If the fault is not cleared, contact My Oracle Support (MOS).