SIP Unauthorized Endpoint Call Routing Configuration

You enable the routing of unauthorized endpoints to session agents and session agent groups that will reject them in the SIP interface configuration.

To enable SIP unauthorized endpoint call routing:

1. In Superuser mode, type configure terminal and press Enter.

   ORACLE# configure terminal
   ORACLE(configure)#

2. Type session-router and press Enter.

   ORACLE(configure)# session-router
   ORACLE(session-router)#

3. Type sip-interface and press Enter.

   ORACLE(session-router)# sip-interface
   ORACLE(sip-interface)#

   If you are adding this feature to an existing configuration, then you will need to select the configuration you want to edit.

4. route-unauthorized-calls—Enter the name (or IP address) of the session agent or session agent group to which you want calls from unauthorized endpoints routed. This parameter is blank by default, meaning the SIP unauthorized call routing feature is disabled.

   Remember your settings in the allow-anonymous parameter in the SIP port configuration provide the basis for rejection.

5. Save and activate your configuration.