Rear Panel Cabling

You can use one connection for High Availability (HA) redundancy support between the two members of an HA node. Oracle recommends reserving wancom0 as the boot and maintenance interface. You can use wancom1 for sharing HA information.

This illustration shows the wancom 0 and wancom 1 ports on the back panel of the Netra X3-2 for Acme Packet.

4 Onboard 10 GigE Ports & 1 Quad GigE NIC

Prerequisites:

Category 6 (or better) Ethernet cables with RJ-45 jacks