1010 - GWS rcvd a priority that is not allowed

This message indicates gateway screening (GWS) has discarded an MSU because the priority is listed as one that is not allowed in this network.

Example

RLGHNCXA21W 00-02-07 11:02:30 EST  EAGLE 35.0.0
0100.1010    CARD 1205,A  INFO   GWS rcvd a priority that is not allowed
SIO=0a   OPC=003-242-000  DPC=000-071-000
H0H1=54  AFTPC=03-03-03
SR=osp3   LSN=A1234567

Note:

Four outputs are possible. The Legend includes abbreviations found in all variations.

Legend

ADDR

Address

AFTPC

Affected point code (for SCCP messages)

AFTSS

Affected subsystem (identifies the subsystem that failed)

AI

Address Indicator

CDPA

Called party address

CGPA

Calling party address

DATA

Information from the upper layers of SCCP management

DPC

Destination point code

H0H11

H0/H1 heading code

LSN

Linkset name. The name must be unique.

MULT

SCCP management message multiplicity indicator

OPC

Origination point code

PC

Point code for the SS7 end user (OPC).

SCCP MT

SCCP message type

SCMG

SCCP management message

SIO

Service information octet

SR

Screening reference name

SSN

Subsystem number

TT

Translation type

TYPE

SCCP management message type

Alarm Level: No alarm condition. The message is informational only.

Recovery

1. This indicates that a MSU was discarded because it failed screening.
   No action is necessary, unless the MSU should have passed. If the MSU should have passed (verified by the fields displayed in the above message), go to 2.
2. Using the rtrv-scr-sio command, verify that the screening reference specified in the above message does not allow MSUs with the priority value indicated.
3. If the MSU should have passed screening, use the chg-scr-sio command to add the pri data to the screening reference.