0443 - RTDB Database Corrupted

A RTDB database is corrupt. The calculated checksum did not match the checksum value stored for one or more records.

Example

RLGHNCXA21W 00-02-07 11:02:30 EST  EAGLE 35.0.0
* 0100.0443 * CARD  1108 VSCCP     RTDB database corrupted

Alarm Level: Minor

Recovery

1. Enter the following command to verify the status of the RTDB database:
   rept-stat-db:display=all:db=mps

   Caution:

   If more than one card is corrupt, perform 2 through 5 to completion for one card at a time.
2. Enter the following command to verify the status of the corrupt card:
   rept-stat-card:loc=xxxx

   Where xxxx is the location of the card identified in the output.

3. Examine the output from 2 Verify that the SST (secondary state of the card) is not Restrict.
   If the SST is Restrict, do not continue with this procedure. Contact My Oracle Support (MOS).
4. Enter the following command to correct the VSCCP card.

   This command reinitializes the card and forces the card to load the current level of the database. Wait for the reload to complete before continuing.

   init-card:loc=xxxx

   Where xxxx is the location of the card identified in output.

5. Enter the following command to verify that the database is the same level as the other cards in the system:
   rept-stat-db:display=all:db=mps
6. If the problem persists, contact My Oracle Support (MOS).