1013 - GWS rcvd Cld Party that is not allowed

This indicates an MSU was received on a gateway link but failed screening because of the called party value in the SCCP called party address field.

Example

The following is an output example when an SCCP management message, such as SSP, SST, SSA, or SSC generates this UIM.

RLGHNCXA21W 00-04-18 18:59:30 EST  EAGLE 35.0.0
0102.1013    CARD 1205,B  INFO   GWS rcvd Cld Party that is not allowed
SIO=03  OPC=003-245-000  DPC=001-004-000
SCMG:    TYPE=000  AFTPC=003-003-003
MULT=000  AFTSS=005
SR=scrb  LSN=A1234567
Report Date:06-09-13  Time:00:13:22

The following is an output example when an SCCP report message, such as UDT, UDTS, or XUDT, generates this UIM.

RLGHNCXA21W 00-04-18 18:59:30 EST  EAGLE 35.0.0
0185.1005    CARD 1101,A2  INFO      GWS rcvd OPC that is not allowed
SIO=03   OPC=007-021-067       DPC=005-022-019
SCCP MT=018
CDPA: AI=05 PC=005-006-007      SSN=006 TT=007
ADDR=0
CGPA: AI=14 PC=015-016-017      SSN=022 TT=023
ADDR=9194603655
SR=scr1  LSN=ABCD123
Report Date:02-07-21  Time:16:20:19

Legend

AFTPC

Affected point code (for SCCP messages)

AFTSS

Affected subsystem (identifies the subsystem that failed)

DPC

Destination point code

LSN

Linkset name. The name must be unique.

MULT

SCCP management message multiplicity indicator

OPC

Origination point code

SCMG

SCCP management message

SIO

Service information octet

SR

Screening reference name

TYPE

SCCP management message type

Alarm Level: No alarm condition. The message is informational only.

Recovery

1. This output indicates that a SCCP message was discarded because it failed screening.
   No action is necessary, unless the message should have passed. If the message should have passed (verified by the fields displayed in the above message), go to 2.
2. Using the rtrv-scr-cdpa command, verify that the screening reference specified in the above message does not allow SCCP messages with the called party address indicated.
3. If the SCCP message should have passed screening, use the ent-scr-cdpa command to add the called party address to the screening reference.