1222 - SCCP rcvd inv GT - invalid selectors

This message indicates that SCCP receives a message from the network requiring global title translation but the message is discarded because the system does not recognize the translation type.

Example

station1234 99-08-30 16:28:08 EST EAGLE 35.0.0
0018.1222 CARD 1103,A INFO SCCP rcvd inv GT - invalid selectors
SIO=03 OPC=001-001-001 DPC=002-002-002
SCCP MSG TYPE=04
CDPA: NI=1 RI=0 GTI=04 SSNI=1 PCI=1
TT=250 NP=04 NAI=010 ADDR=123456789012345678901
PC=003-003-003 SSN=005
CGPA: NI=1 RI=0 GTI=04 SSNI=1 PCI=1
TT=100 NP=07 NAI=012 ADDR=012345678901234567890
PC=001-001-001 SSN=004
LSN=A1234567

Legend

ADDR

Address

CDPA

Called party address

CGPA

Calling party address

DPC

Destination point code

GTI

Global title indicator

MSG TYPE

Message type (for example, connection request, connection confirm, connection refused)

NAI

Nature of address indicator

NI

Network indicator value

NP

Numbering plan

OPC

Origination point code

PC

Point code

PCI

Protocol control information

RI

Routing indicator

SIO

Service information octet

SSN

Subsystem number

SSNI

Subsystem number indicator

TT

Translation type

Alarm Level: No alarm condition. The message is informational only.

Recovery

1. This indicates a SCCP message was received with an invalid global title.

   The translation type indicator was invalid in the EAGLE 5 ISS. If this message should have been routed (verified by the output shown above), continue to 2.

2. Use the command rtrv-tt, and verify that the indicated translation type does not appear in the translation types table.
3. If there is no entry for the translation type indicated in the message, and there should be, use the ent-tt command to add the translation type to the Eagle STP translation type table.

   For more information about procedures for entering translation types, refer to the Database Administration Manual - Global Title Translation.